Presence™ Grey Bluetooth headset for phone calls User Guide
1 Contents Contents The Presence Grey Bluetooth headset................................................................................................................................ 2 Package contents.................................................................................................................................................................. 2 Product overview...............................................................................................................................
2 The Presence Grey Bluetooth headset The Presence Grey Bluetooth headset Package contents Presence Grey mono Bluetooth headset with built-in rechargeable Lithium-Polymer battery The stylish new Presence Grey Bluetooth headset is the wireless solution for phone calls with mobile phones and softphones with superb sound quality in all environments. It features WindSafe and SpeakFocus technology to filter away background noise and enhance voice quality, thus providing ultimate speech intelligibility.
3 Product overview Product overview Overview of the Presence Grey headset Volume – button* Microphones On/Off power slide Volume + button* Multi-function button LED USB socket Speaker Ear hook * You can swap the +/– assignment of the Volume buttons (see page 13) If, for example, you want to wear the headset on the left ear instead of the right (see page 9).
4 Product overview 3x Overview of the LEDs 3x Overview of the headset LED Headset 2s LED 2s 3x 3x Meaning Headset switches on 3x 0.2s 3x 0.2s 2s 2s 2s 2s 3x 3x 3x 3x 3x 0.2s 3x 0.2s 2s 2s 3s 2s 0.2s 0.2s 2s 2s 3s 2s 0.2s 0.2s 0.2s 0.2s 0.2s 0.
5 Putting the headset into operation Putting the headset into operation Charging the headset battery WARNING Danger of injury! ! Wearing the headset when charging can cause burns and injuries. Do not wear the headset when charging. A complete charging cycle takes about 1 hour and 20 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption. 1 2 OFF Gently push the on/off power slide towards the headset.
6 Putting the headset into operation Battery level indicator displayed on Apple iPhone When the headset is paired with an iPhone, the iPhone screen shows an additional battery level indicator for the headset. Pairing the headset with Bluetooth devices ! CAUTION Danger of malfunction! The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices. Only make calls with the headset in locations where wireless Bluetooth transmission is permitted.
7 Putting the headset into operation Pairing the headset with a Bluetooth device By way of example of a mobile phone, the following chapter describes how to pair the headset with a Bluetooth device. In case of deviation, proceed as described in the instruction manual of your mobile phone. 2 1 press & ”Pairing“ hold... OFF ON Gently push the on/off power slide towards the headset. The voice prompt “power off” is announced in the headset and the LED flashes red 3 times.
8 Putting the headset into operation Using the headset with a computer and a Bluetooth USB dongle 2 1 ”Pairing“ press & hold... OFF ON Gently push the on/off power slide towards the headset. The voice prompt “power off” is announced in the headset and the LED flashes red 3 times. 3 Keep the multi-function button pressed and gently pull the on/off power slide away from the headset. The LED alternately flashes blue and red. The headset is in pairing mode.
9 Using the headset Using the headset Individually adjusting the headset and wearing it For an optimized and individual wearing comfort, the headset can be worn on your left or right ear in three different ways: with the ear hook or the ear adapter or a combination of both. A B S S M M L L Wearing the headset with ear adapter 1 2 M L S Remove the ear hook and the ear adapter without loop (premounted) or the ear adapter with loop from the headset.
10 Using the headset Wearing the headset using the ear hook You can combine the ear hook with the ear adapter without loop. If then the headset does not fit properly, use one of the ear adapters with loop. 1 S M 2 L Remove the ear adapter with loop if necessary and attach the ear adapter without loop, whichever feels most comfortable. Attach the ear hook to the headset. If you want to change the wearing ear of the headset, attach the ear hook the other way round.
11 Using the headset Switching the headset on and connecting it 1 ON Gently pull the on/off power slide away from the headset. The LED flashes blue 3 times. The voice prompt “power on” is announced in the headset. 3x ”Power on“ The LED flashes 3 times blue every 2 seconds until the headset finds a paired Bluetooth device to connect to. 2 2s 2s 3x ”...
12 Using the headset Switching the headset off OFF ”Power off“ Gently push the on/off power slide towards the headset. The voice prompt “power off” is announced in the headset and the LED flashes red 3 times. The headset ends the call and switches off. All volume settings are saved automatically when the headset is switched off.
13 Using the headset Changing the volume CAUTION Hearing damage due to high volumes! ! Listening at high volume levels for long periods can lead to permanent hearing defects. Set the volume to a low level before putting on the headset. Do not continuously expose yourself to high volumes. Swapping the +/– assignment of the Volume buttons You can swap the +/– assignment of the Volume buttons If, for example, you want to wear the headset on the other ear (see page 9).
14 Using the headset Muting the headset’s microphone Muting the microphone Unmuting the microphone ”Mute on“ Press the Volume + and – button. The voice prompt “Mute on“ is announced. ”Mute off“ Press the Volume + and – button. The voice prompt “Mute off“ is announced. Enabling/disabling voice prompts In idle mode (no active call or music reproduction): Press and hold both volume buttons.
15 Making calls using the headset Making calls using the headset Making a call Dial the desired number on your mobile phone. You hear a beep in the headset. If your mobile phone does not automatically transfer the call to the headset: Press the multi-function button once to transfer the call from the mobile phone to the headset. Alternatively, press a button on your mobile phone (see the instruction manual of your mobile phone). Accepting/rejecting/ending a call ”Phone ...
16 Making calls using the headset Transferring the call to/from the headset Once a connection is established, you can transfer the call to/from the headset. Press the multi-function button: 1s Transfers a call from the headset to the mobile phone Transfers a call from the mobile phone to the headset Redialing The redialing function is only supported by Bluetooth devices with a “hands free profile” (HFP).
17 Making calls using the headset Managing multiple calls You can use the headset simultaneously with two connected Bluetooth devices (see page 6). Managing two calls You can manage two calls: • from either two different Bluetooth devices or • from one Bluetooth device. If you receive a call during an active call: Press the multi-function button: ”Phone ...
18 Cleaning and maintaining the headset Cleaning and maintaining the headset CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the device can cause a short circuit and damage the electronics. Keep all liquids far away from the product. Do not use any cleansing agents or solvents. Cleaning the headset Only use a dry cloth to clean the product.
19 Cleaning and maintaining the headset Updating the firmware of the products You can update the firmware of your headset system and Bluetooth dongle by using the free HeadSetup™ Pro software. Download the software from www.sennheiser.com/software. Install the software. To install the software, you need administrator rights on your computer. If necessary, contact your IT department. www.sennheiser.
20 If a problem occurs ... If a problem occurs ... Problem Possible cause Solution Page Headset cannot be switched on The rechargeable battery is flat. Recharge the rechargeable battery. 5 No audio signal The headset is not paired with the mobile phone. Check if the headset is paired. If necessary, pair the headset again. 6 The volume is adjusted too low. Increase the volume. 13 The headset is switched off. Switch the headset on. 11 Headset cannot be paired The pairing does not work.
21 Specifications Specifications Presence Grey headset Dimensions (W x H x D) 51 x 19 x 23 mm / 2.01 x 0.75 x 0.91 in Weight without ear hook approx. 13 g / 0.46 oz / 0.03 lbs Standby time up to 14 days Talk time up to 10 hours Charging time 1 h 20 min Rechargeable battery (built-in) Lithium Polymer; 3.7 V / 120 mA Speaker type dynamic, neodymium magnet Speaker frequency response 150 – 6,800 Hz (wideband) 300 – 3,400 Hz (narrowband) 100 – 15,000 Hz (A2DP/Music) Sound pressure max.
22 Specifications Sennheiser Communications A/S Industriparken 27, DK-2750, Denmark www.sennheiser.com Presence Grey Bluetooth headset Publ.