Installation Instructions

EN
US & CANADA
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC rules and with Industry
Canada license-exempt RSS standard(s). Operation is subjected to
the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device of the FCC Rules, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for
help.
Changes or modi cations made to this equipment not expressly
approved by the manufacturer may void FCC authorization to
operate this equipment.
RF Radiation Exposure Information
The device complies with FCC and Innovation, Science and
Economic Development Canada’s RF radiation exposure limits set
forth for an uncontrolled environment. Use of other accessories
not veri ed by the manufacturer may not ensure compliance with
FCC/Innovation, Science and Economic Development Canada’s
RF exposure guidelines. Further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is
available. These transmitters must not be co-located or operated in
conjunction with any other antenna or transmitter.
Responsible party
Demant Sound USA, Inc.
Little Falls Drive, Wilmington 19800, New Castle, USA
Tel: [phone]
FR
CANADA
Déclaration requise par la d’Innovation, Sciences et
Développement économique Canada
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1) L’’appareil ne doit pas produire de brouillage nuisible; et
2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Information sur l‘exposition aux radiofréquences
Cet équipement est conforme aux limites d ‘exposition aux
rayonnements d’Innovation, Sciences et Développement
économique Canada établies par la norme RSS-102 pour un
environnement non contrôlé.
L‘utilisation d‘autres accessoires non homologués par le fabricant
remet en cause la conformité aux normes imposées par Innovation,
Sciences et Développement économique Canada.
Une réduction supplémentaire de l’exposition aux RF peut être
obtenue si le produit peut être maintenu aussi loin que possible du
corps de l’utilisateur ou si l’appareil est réglé sur une puissance de
sortie inférieure, si cette fonction est disponible.
Ces transmetteurs ne doivent pas être placés au même endroit ou
utilisés simultanément avec un autre transmetteur ou antenne.
ZH-CHS
CHINA RoHS
剣嫩剣㹱暟餘䧴⯋稆
鿇⟝せ獥
Parts
꜍
Pb
寎
Hg
ꞑ
Cd
Ⱈ⟞Ꜵ
Cr
+6
㢳徂翫薅
PBB
㢳徂✳薅ꄍ
PBDE
歏騟垷㗌
Circuit Modules
xoo o o o
劤邌呓⣛䰘SJ/T 11364涸錞㹀綘ⵖկ
o : 邌爙霪剣㹱暟餘㖈霪鿇⟝䨽剣㖱餘勞俱⚥涸ろꆀ㖱㖈GB/T 26572
錞㹀涸ꣲꆀ銲実⟃♴կ
x : 邌爙霪剣㹱暟餘荚㼰㖈霪鿇⟝涸厤♧㖱餘勞俱⚥涸ろꆀ馄⳿
GB/T 26572錞㹀涸ꣲꆀ銲実կ
Trademarks
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
DSEA A/S is under license.
Qualcomm is a trademark of Qualcomm Incorporated, registered
in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United
States and other countries.
All other trademarks are the property of their respective owners.
DSEA A/S EPOS UK Ltd.
Kongebakken 9, DK-2765 Smørum, Denmark
3800 Parkside, Birmingham B37 7YG, UK
www.eposaudio.com Printed in China, 03/22, 770-00415/A01