User guide

36
4.1. through the network using simple commands in your own program
Developers who want to implement the power outlet control in own programs can access to a special page
named hidden.htm and control individually the power outlets using simple commands.
To configure the Hidden Page Account, go to Settings / Accounts.
- To activate or deactivate this account, check or uncheck the corresponding checkbox.
- To modify the Hidden page account, click on "Edit" next to the corresponding account.
A new page appears, allowing you to set all the parameters of the account.
Activated
This check box must be checked to activate the Hidden Page Account. It enables to deactivate temporarily
this account while keeping all its settings for a later use. The Hidden Page Account cannot be deleted.
User Name
In this field, enter the name you want to give to the Hidden Page Account.
The user name can be up to 32 characters long and contain alphanumeric characters.
Do not use quotes or special characters in labels!
Password
In this field, enter the password you want to give to the Hidden Page Account.
The password can be up to 32 characters long and contain alphanumeric characters.
Confirm Password
In this field, enter the password again for confirmation.
IP Address Control
Network security can be increased by IP address filtering. Check this checkbox and specify an IP address
or a range of IP addresses which has the right to access to the Hidden Page Account.