User guide

8
DHCP:
Check this box is you want to obtain the IP address, the subnet mask and the default gateway for your
ePowerSwitch 1G
R2
via DHCP.
Use of DHCP (Dynamic Host Configuration Protocol) requires a DHCP host to be set up on the
network.
IP Address:
IP address of the ePowerSwitch 1G
R2
, default is 192.168.100.200.
Subnet Mask:
Subnet Mask of the ePowerSwitch 1G
R2
, default is 255.255.255.0.
Gateway:
Generally the address of your router, default is blank.
DNS 1:
Primary DNS (Domain Name Server), default is blank.
DNS 2:
Secondary DNS, default is blank.
Port Number:
Port number: default is 80 (HTTP).
Version:
Firmware version of the ePowerSwitch 1G
R2
Finder authorized:
The Network parameters of the ePowerSwitch 1G
R2
can be configured through a Local Area Network
using the provided Finder Program. It is a simple and fast configuration method if you use Windows as
operating system.
!!! The Finder Program is enabled as default value. For security reasons we suggest to disable the
Finder program after the first configuration.