Specification

Cam Lock Assembly Instructions
Before Installation
Thank you for purchasing this quality product.Be sure to check all packing materials carefully for
small parts,which may have come loose inside the carton during shipment.Identify and count all
items according to the PARTS LIST and/or HARDWARE LIST shown below.Check you have all the
components and tools listed on the following pages.
•We recommend that you assemble this product with the assistance of another person;this will
make the assembly easier,and will help eliminate damage to the product or injury to persons
during assembly.
•Please do not over tighten screws or bolts until the assembly is completed.
•Keep children and animal away from the work area,small parts could choke if swallowed.·Please
put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
Diagram A
Diagram B
Diagram C
Insert Cam Bolt into hole as shown in diagram A.
Make sure not to insert the Cam Bolt:
Too deep as shown in figure B as this will cause
the Cam Lock to be misaligned and unable to
interlock properly.
Also avoid inserting the Cam Bolt too close to
the surface of the hole as shown in figure C,as
this will cause the Cam Lock to be too
loose,and not interlock properly.
Connect the panels together.
Insert the Cam Lock so the side opening fits
over the head of the Cam Bolt.
To tighten the Cam Lock,turn it clockwise on
half a turn with a flat screwdriver.
*Do not use an automatic screwdriver as it may
bend or break if too much power is imposed.
ARROW SIGN
Important-Please read these instructions fully before starting assembly