User's Manual

PM01BA0 REV 1.0 602A002BPT100
~10~
Of course, you can re-establish the link by turning the power
switch off and on again and then following the steps of
section D.
& Note3: The lever of directional switch is not designed
to handle the strong rotated force. Please use the lever
moderately. (P.S. Rotational: No damage with an application
of 0.15N.m.)
& Note4: In the case where the applied turn strength is too
strong, the lever will be fix. Please move lever any direction.
It will operate again.
& Note5: Please change your battery if the "Low Battery"
message is shown on your system try or the laser beam is
getting dark.
E. CAUTION TO USE THE LASER BUTTON
Since the laser beam is harmful to human eyes, please be
careful to use the laser pointer.
Warning
Don’t point to the eyes.
Don’t disassemble it.