Manualshelf

User`s manual

ManualsBrandsEPOX ManualsComputer equipmentAn Intel Socket 478 Processor Based Mainboard (400/533MHz)
41424344454647484950
BIOS
Page 4-10
4-4 Integrated Peripherals
Figure 5: Integrated Peripherals
Notes:
If you do not use the Onboard IDE connector, then you will need to set Onboard
Primary PCI IDE: Disabled and Onboard Secondary PCI IDE: Disabled
The Onboard PCI IDE cable should be equal to or less than 18 inches (45 cm.).
Init Display First
If two video cards are used (1 AGP and 1 PCI) this specifies which one will be the
primary display adapter. The default is PCI Slot.
Options: PCI Slot, AGP.
Onboard Lan Boot ROM
Enables and disables the onboard LAN Boot ROM. The default is Disabled.
Options: Enabled, Disabled.