User`s manual
Installation
Page 3-3
Step 1
Open the socket by raising the actuation
lever.
Figure 1
Step 2
Align pin 1 on the CPU with pin 1 on
the CPU socket as shown in the
illustration above. The CPU is keyed to
prevent incorrect insertion. Dont
force the processor into the socket. If
it does not go in easily, check for mis-
orientation and reinsert the CPU.
Make sure the processor is fully
inserted into the socket.
Figure 2
Pin 1
Easy Installation Procedure
The following must be completed before powering on your new system:
3-1. CPU Installation
3-2. Jumper Settings
3-3. System Memory Configuration
3-4. Device Connectors
3-5. External Modem Ring-in Power ON and Keyboard Power ON
Functions (KBPO)
3-6. STR Function
3-7. 845PE Platform AGP Card 4X/1.5V Protection
Section 3-1
CPU Installation