User`s manual

BIOS
Page 4-3
Notes:
_ If the hard disk Primary Master/Slave and Secondary Master/Slave are
set to Auto, then the hard disk size and model will be auto-detected.
_ The Halt On: field is used to determine when to halt the system by
the BIOS if an error occurs.
_ Floppy 3 Mode support is a mode used to support a special 3.5-inch
drive used in Japan. This is a 3.5-inch disk that stores 1.2 MB. The
default setting for this is disabled.
4-2 Advanced BIOS Features
Selecting the ADVANCED BIOS FEATURES option in the CMOS SETUP
UTILITY menu allows users to change system related parameters in the displayed
menu. This menu shows all of the manufacturers default values for the board.
Pressing the [F1] key displays a help message for the selected item.
Figure 3: BIOS Features Setup