User`s manual

BIOS
Page 4-7
First /Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the se-
quence selected in these items.
Options: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled.
Boot Other Device
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the first, second, and
third boot devices. The default is Enabled.
Options: Enabled, Disabled.
Swap Floppy Drive
This will swap your physical drive letters A & B if you are using two floppy
disks. The default is Disabled.
Enabled: Floppy A & B will be swapped under the O/S.
Disabled: Floppy A & B will be not swapped.
Boot Up Floppy Seek
If this item is enabled, it checks the size of the floppy disk drives at start-up
time. You dont need to enable this item unless you have a legacy diskette drive
with 360K capacity. The default is Disabled.
Options: Enabled, Disabled.
Report No FDD For Win 95
If you are running a system with no floppy drive and using Windows 95, select
Yes for this item to ensure compatibility with the Windows 95 logo
certification. Otherwise, select No.
Yes: The system has no floppy drive and you are using Windows 95.
No: The system has an operating system other than Windows 95.