Specifications

BIOSEP-MVP4G

Page 4-3

NOTE: The “Halt On:” field is used to determine when to halt the system by

the BIOS if an error occurs.

NOTE: Floppy 3 Mode support is a mode used to support a special 3.5”

drive used in Japan. This is a 3.5” disk that stores only 1.2 MB, the default

setting for this is disabled.

4-2 BIOS Features Setup

Selecting the “BIOS FEATURES SETUP” option in the CMOS SETUP UTILITY

menu allows users to change system related parameters in the displayed menu. This

menu shows all of the manufacturer’s default values for the EP-MVP4G.

Pressing the [F1] key will display a help message for the selected item.

Figure 3: BIOS Features Setup

Virus Warning: During and after the system boots up, any attempt to write to the

boot sector or partition table of the hard disk drive will halt the system and an error

message will appear.

You should then run an anti-virus program to locate the virus. Keep in mind that this

feature protects only the boot sector, not the entire hard drive.

The default value is Disabled.

ROM PCI/ISA BIOS(2A5LHPA9)

BIOS FEATURES SETUP

AWARD SOFTWARE, INC.

Virus Warning : Disabled Video BIOS Shadow : Enabled

CPU Internal Cache : Enabled C8000-CBFFF Shadow : Disabled

External Cache : Enabled CC000-CFFFF Shadow : Disabled

Quick Power On Self Test : Enabled D0000-D3FFF Shadow : Disabled

Boot Sequence : A, C, SCSI D4000-D7FFF Shadow : Disabled

Swap Floppy Drive : Disable D8000-DBFFF Shadow : Disabled

Boot Up Floppy Seek : Enabled DC000-DFFFF Shadow : Disabled

Boot Up NumLock Status : On Diskette Access For : All

Gate A20 option : Fast

Memory Parity/ECC Check : Disabled

Typematic Rate Setting : Disabled

Typematic Rate (Chars/Sec) : 6

Type matic Delay (Msec) : 250

Security Option : Setup

PCI/VGA Palette Snoop : Disabled

OS Select For DRAM > 64MB : Non-OS2

Report No FDD For WIN 95 : Yes

Esc : Quit : Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old Values (Shift) F2 : Color

F7 : Load Setup Defaults

éé

êê

èè

çç