User Manual

7 Further functions

BioPhotometer Data Transfer Software — Operating Manual

7 Further functions

7.1 COM Port setting

The standard setting of the software is designed to automatically scan for the COM Port interface

after the device and software are switched on. As soon as the software finds the corresponding

COM Port with the switched-on BioPhotometer plus, a message appears under Data Output:

Connected Device: BioPhotometer plus found at COM 1

Alternatively, you can set the COM Port manually. In this case only this COM Port is checked for

a switched-on BioPhotometer plus.

7.1.1 Manual setting

Proceed as follows:

1. Settings in the Menu Select file.

The following window opens:

2. Activate the manual entry in the area Devices: Manual device configuration

Further functions