Manual

52
2 Technical data
Operation
Cuvette material: dsDNA, ssDNA, RNA, Oligo, Protein: Quartz glass or plastic
(UVette
®
from Eppendorf)
OD 600, Bradford, Lowry, BCA: Glass or plastic
Cuvette shaft: 12.5 mm x 12.5 mm, not temperature-controlled
Overall height of cuvettes: Min. 36 mm
Height of light beams
in the cuvette: 8.5 mm
Light bundle in the cuvette: Width: 1 mm
Height: 1.5 mm
Keypad: 19 foil keys
Display: Illuminated graphic display, 33 mm x 60 mm
User guidance: English, French, German
Results output: Via display and printer
Absorbance, concentration, ratio
General data
Supply voltage: 100 to 240 V ± 10 %; 50 to 60 Hz ± 5 %
Overvoltage category: II (IEC 61010-1)
Pollution degree: 2 (IEC 664)
Power requirement /
power output: Approx. 20 W in operation, approx. 10 W in Standby mode
Current consumption: < 0.3 A
Permitted mains interruption: Approx. 10 ms at 90 V
Approx. 200 ms at 220 V
Fuses: T 1 A / 250 V, 5 mm x 20 mm (2 pcs.)
Ambient conditions: 15 to 35 ° C with defined precision and accuracy
–25 to 70 ° C when not in operation or when stored
15 to 70 % relative humidity
Cannot be used in tropical climate
Keep out of direct sunlight
Printer connection: RS-232 C, serial, data format: 1 start bit, 8 data bits, no parity,
1 stop bit, 9600 Baud
The printer that is connected must comply with the requirements
of EN 60950 or UL 1950.
Standards and regulations: Complies with VDE, CE, IEC 1010-1
Dimensions: Width: 20 cm (packaged: 29 cm)
Depth: 32 cm (packaged: 43 cm)
Height: 10 cm (packaged: 20 cm)
Weight: 3 kg (packaged: 4,8 kg)
Technical specifications subject to change.
02_TecDat_e.fm Seite 52 Montag, 20. Februar 2006 16:06 Uhr