Manualshelf

User Manual

ManualsBrandsEppendorf ManualsEquipmentBioSpectrometer Test filter set - Didymium
1234
Status: 28.02.2011
Trade name: BioSpectrometer Test filter set - Didymium
Product no.: 6135931088-00
Version: 1.0.0 / GB
EC safety data sheet
page 1(4)
1.)
Identification of the substance/mixture and of the company/undertaking
Trade name
BioSpectrometer Test filter set - Didymium
Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses of the substance or mixture
wavelengths adjustment container
Details of the supplier of the safety data sheet
Address
Eppendorf AG
Barkhausenweg 1
D-22339
Telephone no.
+49 40 53801-0
Information provided by / telephone
Eppendorf Application-Hotline
Tel.: +49 1803 66 67 89
Fax: +49 4053 99 01 25
email: support@eppendorf.de
Emergency telephone
For medical advice (in German and English):
+49 (0)551 192 40 (Giftinformationszentrum Nord)
Advice on Safety Data Sheet
sdb_info@umco.de
2.)
Hazards identification
Classification of the substance or mixture
Classification information
This product is in the sense of article 3 of the Regulation (EC) 1907/2006 (REACH) an article and not subject to
the labelling obligations according to:
- Art. 1, Regulation (EC) 1272/2008 (CLP);
- Article 12.(2), Directive 1999/45 (DPD).
To provide a safety data sheet is not mandatory for articles and is done on a voluntary basis.
Other hazards
The information given in this safety data sheet are for the cuvette. Due to the small size and volume of the sealed
cells and the complete sealing of the materials in quartz cells the only contact that can be made to the chemicals
is through the breakage of the cells. The quartz shards would be more hazardous and must be handled as with
any glass breakage. Direct skin contact will cause irritation.
3.)
Composition / information on ingredients
Chemical characterization
Cuvette, contains aqueous solution prepared in 10% (volume fraction) perchloric acid to contain 2,75% (mass
fraction) Neodymium Oxide and 8,6% (mass fraction) Praseodymium Oxide.
4.)
First aid measures
General information
In case of persisting adverse effects, consult a physician. Change contaminated, saturated clothing.
After inhalation
Remove affected person from the immediate area. Ensure supply of fresh air.
After skin contact
Wash off immediately with soap and water.
After eye contact
Separate eyelids, wash the eyes thoroughly with water (15 min.).

Summary of content (4 pages)