Manual

Instructions for use

Combilong®/Combitube®

English (EN)

Instructions for use Combilong®/Combitube®seeon p.Fig.Tab.p.

English (EN)

1 Combilong/Combitube

1.1 Features

The Eppendorf Combilong/Combitube aspirating aid allows for aspirating liquids from

bottles whose diameter does not exceed 50 mm. The aspirating aid can be used in

combination with all Eppendorf dispensers.

1.2 Materials

1.3 Preparing the aspirating aid

1. Shorten the tube to the desired length.

2. Insert the aspirating aid into the bottle.

1.4 Filling the reservoir

Prerequisites

Combitip advanced 50 mL.

1. Insert the Combitip into a dispenser.

2. Insert the tip of the Combitip firmly into the opening of the reservoir.

3. Aspirate the liquid up to the min mark.

• The reservoir is filling.

4. Draw the Combitip a little bit out of the opening and put the liquid back into the

reservoir or the source vessel.

1.5 Removing liquid

1.5.1 Combitip advanced 2,5 mL and 50 mL

1. Insert the tip of the Combitip into the opening of the aspirating aid.

2. Aspirate the liquid.

NOTICE! Aggressive substances may damage dispensers, Combitips and

accessories.

 Check the resistance to chemicals when using organic solvents or aggressive

chemicals.

 Observe the cleaning instructions.

Component Material

Aspirating aid Polypropylene (PP)

Details on the resistance of polypropylene can be found in the instructions for

use of the Combitips advanced on our website www.eppendorf.com/cbt

PAGE 1
Instructions on see Combilong®/Combitube® p. Tab. Fig. p. for use English (EN) Instructions for use Combilong®/Combitube® English (EN) 1 1.1 Combilong/Combitube Features The Eppendorf Combilong/Combitube aspirating aid allows for aspirating liquids from bottles whose diameter does not exceed 50 mm. The aspirating aid can be used in combination with all Eppendorf dispensers. 1.2 Materials NOTICE! Aggressive substances may damage dispensers, Combitips and accessories.
PAGE 2
Instructions for use Combilong®/Combitube® English (EN) 1.5.2 Combitip advanced 0.1 mL, 0.2 mL and 1.0 mL 1. Immerse the tip of the Combitip in the liquid in the reservoir. 2. Aspirate the liquid. 1.6 1. 2. 3. 4. Cleaning the aspirating aid Remove aspirating aid from the bottle. Wipe the tube. Aspirate residual liquid from the reservoir. Rinse the aspirating aid repeatedly with distilled water and leave to dry. 1.6.