Instruction Manual
23
5 Operation
Concentrator plus / Vacufuge® plus — Operating manual
5 Operation
5.1 Overview of operating controls
Before using the device for the first time, familiarize yourself with the operating controls and the
device display. A depiction of the operating controls and device display can be found on the rear
fold-out page (see Fig. 3).
5.2 Functions
Concentrator plus and Vacufuge plus can be used as a concentrator, a desiccator or a centrifuge.
For the concentrator and desiccator functions, there are three different modes available for the
quick concentration of different solvents:
Before operating the device, press the mode/vent key to set the desired function.
1 Concentration run time
1 min to 9:59 h, infinitely (oo), adjustable
in 1 min increments.
2 Brake function
ON: Brake function on.
OFF: Brake function off.
3 Temperature
--: Heating off.
30/45/60 °C: Heating on.
4Mode
(see Functions on page 23).
5 Status of the diaphragm vacuum pump
(vac)
Off: Pump off.
On: Pump running.
6 Status of device lid (lid)
Off: Lid locked.
On: Lid unlocked.
7 Starting and/or stopping
concentration
8 Setting the mode
Manual ventilation of the rotor chamber
during a concentrator /desiccator run
while the key is pressed and held. The
following appears in the display
Ventilation.
9 Setting the temperature 10 Setting the brake function
11 Setting the concentration run time
Function Mode suitable for
Concentrator V-AQ (vacuum - aqueous) aqueous solutions
V-AL (vacuum - alcoholic) alcoholic solutions
V-HV (vacuum - high vapor) solutions with high vapor pressure
Desiccator D-AQ (desiccator - aqueous) aqueous solutions
D-AL (desiccator - alcoholic) alcoholic solutions
D-HV (desiccator - high vapor) solutions with high vapor pressure and
dry substances
Centrifuge CEFU (centrifuge) centrifugation at 1,400 rpm
Hint!
If possible, use modes V-AQ, V-AL, D-AQ or D-AL and/or occasionally operate the mode/vent
key during the run.
Hint!
During operation, you cannot change the set function. Instead, ventilate the rotor chamber during
the concentrator or desiccator function, while holding the mode/vent key.
EN
Operating manual