Instruction Manual

Instructions for use
Microplate VIS, 96/F-PS
English (EN)
Instructions for use Microplate VIS, 96/F-PSMicroplate VIS, 96/F-PSseeon p.Fig.Tab.p.
English (EN)Instructions for use
1 Product description
The Eppendorf Microplate VIS, 96/F-PS is suitable for the absorbance
measurement in a plate reader with wavelengths higher than 340 nm.
The products are designed for single use in routine, research and training labs in
the bioscience, industrial and chemical fields. The Eppendorf Microplate VIS,
96/F-PS is intended for use by qualified personnel only.
2 Notes for use
WARNING! Contamination risk from damaged plates during
centrifugation.
The plates withstand heavy loads during centrifugation. However, they
can be destroyed and release the substances they contain if used
improperly.
 Always observe the maximum permitted centrifugation forces.
 Read the operating manual of the centrifuge used.
 Centrifuge stacked plates at lower speed only.
 Note that organic solvents may reduce the mechanical load capability
of the plates. If in doubt please contact the Eppendorf Application
Support ([e-mail]).
WARNING! Damages to health due to infectious liquids and
pathogenic germs.
 When handling infectious liquids and pathogenic germs, observe the
national regulations, the biological security level of your laboratory,
the material safety data sheets, and the manufacturer's application
notes.
 Wear personal protective equipment.
 Consult the "Laboratory Biosafety Manual" (Source: World Health
Organization, Laboratory Biosafety Manual, as amended) for
comprehensive regulations on the handling of risk group II germs or
biological materials.
P-PRAKTIKUM-6_out.fm Seite 1 Mittwoch, 27. März 2013 11:04 11