Manual

Product description

Multipette

/Repeater

(X)stream

English (EN)

2.6 Overview Combitips advanced

Combitips advanced are disposable devices for aspirating and dispensing liquids

according to the positive displacement principle. Combitips advanced are used in

Eppendorf dispensers (e.g., Multipettes/Repeaters) and are made up of a cylinder and a

piston. Combitips advanced in sizes 25 mL and 50 mL require an Adapter advanced.

Combitips advanced are available in various sizes, which are marked using a color code.

Abb. 2-3:Di splay

Fig. 2-3: Display

1Volume

Unit in µL or mL.

2 Direction of the next piston movement

Aspirate liquid

Dispense liquid

3Key lock

is only displayed if the +/- rocker switch is locked.

Can be stored or activated for the device parameters

(see p. 34).

4 Battery

Battery charging status. Possible displays:

Battery full

Battery exhausted

Battery severely discharged

Battery empty

If the battery is exhausted, complete the dispensing

operation and charge the battery. If the battery is

severely discharged, or Warning Battery Low!

appears on the display, stop the dispensing

operation immediately and charge the battery for at

least two hours.

5 Dispensing step

In the Dis, Ads and Seq modes, the number of

possible dispensing steps. In the Asp mode, the

number of performed Asp steps

6 Interpunct

Is displayed in the Dis, Ads and Asp modes before

aspiration. Indicator for the number of dispensing

steps. The pipetted volume must always be greater

than the product of the multiplication of the volume

(1) with the dispensing step (5).

•

µL

100.0