Manual

27
Operation
Multipette
®
/Repeater
®
(X)stream
English (EN)
5.4 Dispensing
1. Prepare the Multipette stream/Repeater stream.
2. Immerse the Combitip into the liquid to be aspirated.
3. Press the actuate key. Liquid is aspirated.
The display will then show:
4. Hold the Multipette stream/Repeater stream over a waste container or the supply
vessel and press the actuate key. This step is not a dispensing step.
The reverse stroke is performed.
5. Hold the Combitip over the first tube into which the liquid is to be dispensed.
6. Press the actuate key to dispense the liquid. Repeat the process for every additional
dispensing step. After each dosing step, the display will show the volume of the next
dispensing step and the number of the remaining dispensing steps.
After complete dispensing, the display shows:
Dispensing speed
Select the highest speed for
dispensing small volumes in free
jet mode. Select a low speed for
viscous solutions.
If there is a risk of liquid
splashing out of the destination
tube during dispensing, reduce
the dispensing speed.

Interval time
Distance of time between the
dispensing steps. You can
choose times between 0.1 - 10 s.
–––––
During dispensing the aspirated liquid is
dispensed step by step in partial volumes of
equal size. With the smallest dispensing
volume and the Combitip completely filled,
100 dispensing steps are possible.
Display Parameter function Dis Ads Seq Asp Pip Ttr
Speed
1.0 s
Set time:
1234
1
2
next step
Discard