Manual

9
Product description
Multipette
®
/Repeater
®
(X)stream
English (EN)
2 Product description
2.1 Main illustration
Abb. 2-1:Front view
Fig. 2-1: Front view
1 Connector socket
For connecting the charging plug of an Eppendorf
Multipette stream/Repeater stream power supply
device.
2 Hardware reset button
Triggering a hardware reset interrupts the power
supply (see p. 40).
3 Selection dial
For setting the operating mode.
Depending on the Multipette stream/Repeater
stream version, different operating modes are
available. The illustration shows the Xstream.
4 Display (illuminated)
Displays the parameter settings (volume, dispensing
steps, speeds) and provides feedback and
information on the operating steps.
5 Select rocker switch
For switching between the execution and editing
displays.
6Reset key
For stopping or canceling dispensing operations
(see p. 34).
7+/- rocker switch
For changing parameters. Higher speed level with
volume change when you press the +/- rocker switch
more firmly.
8Actuate key
For triggering dispensing operations. For saving
entries during editing and for returning to
dispensing.
9Ejector
Releases the inserted Combitip.
10 Combitip advanced
Dispenser tip
Asp
Seq
Ads
Ttr
Pip
Dis
+ / –
reset
select
1
2
3
4
5
6
7
8
9
10