User`s manual

18
Running A Control Solution Test
2. Press “X” for 1 seconds to
set “ ”.
3. Place the meter on a flat
surface, like a table.
4. Remove the control
solution bottle cap and
wipe the tip of the bottle
with a tissue.
5. Squeeze the bottle until a tiny drop forms at
the tip of the bottle.
Touch the drop to the Blood collection area at
the end of the test strip.
Do not put control solution on top of the
test strip.
When you hear the beeper, you have enough
control solution in the test strip.
The meter starts to count down from 5
seconds and will show the results.
1. Put a test strip into the
meter in the direction of
the arrow.