User`s manual

25
Running A Blood Glucose Test With Blood From Your Fingertip
1. Wash your hands with soap
and warm water.
Rinse and dry thoroughly.
2. Put a test strip into the meter
in the direction of the arrow.
The meter turns on.
3. Swab the blood collection area on
your finger with an alcohol swab.
Please wait at least 5 seconds until
the intended area is dry and clean
before sampling the blood.
4. Place the lancing device against the
pad of your finger. Press the trigger
button to activate the lancing
device.
Note:
If a flag icon of “ ” is set, press “X” for 1
seconds to cancel the setting of control solution
test.