User`s manual

Setting The Alarm

The meter can set up to 4 alarms, allowing you to control your test times according to your requirements.

1. Press “X” for 5 seconds and

enter the setting mode of alarm.

2. Press “W” to set “On” for the first

alarm.

3. Press “W” to adjust time and

press ” X” to confirm the setting

(24-hour clock).

4. Press “X” to confirm the first

setting and then get into the

second one.

5. Repeat step 1 to 4 to set other

3 alarm. If you don’t want to

turn on the alarm at all, turn

every alarm "OFF" at the upper

left corner of the display.

Press “X” to confirm the

setting.