User`s manual

39
Maintenance and Testing
Your meter needs little or no maintenance with normal use. It automatically
tests its own systems every time you turn it on and lets you know if something is
wrong. (See "Screen Messages" and what to do about them.)
To make sure the display is working properly, turn off the meter. Press and hold
“W” or “X” to see the complete display. All the indicators should be clear and look
exactly like the picture to the left. If not, call the Customer Care Service Center
toll-free: 1-866-203-2761(Eastern Time, Mon-Fri 9:00AM~5:00PM).
Cleaning Your Lancing Device
 To clean the lancing device, wipe it with a soft cloth dampened with water and mild detergent.
DO NOT place the entire device under water.
 To disinfect the cap after cleaning, place it in 70%~75% rubbing alcohol for 10 minutes at least once a
week. Allow the cap to air-dry after disinfecting.