User`s manual

17
Running A Control Solution Test
You need the meter, a test strip, and control solution
3. Place the meter on a flat surface,
like a table.
4. Remove the control solution bottle
cap and wipe the tip of the bottle
with a tissue.
1. If display stays at or and no any setting is made, the test results will always
in or .
2. If you do not choose “CtL”, the test results will be included in the memory of blood
test.
1. Put a test strip into the meter in
the direction of the arrow and the
icon of shows itself.
2. Press twice to set
“CtL ” and press to
confirm the setting.