Color Image Scanner Color Image Scanner User's Guide User's Guide Printed in Japan 99.06-.1 User's Guide 4010810 Cover-F DIC F 43 PANTONE327C Bk Rev.
L R4C448 Rev. C A5 size 2/11/00 COVER.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Where to Find Information This User's Guide This guide leads you through the scanner setup and options installation, tells you how to use the scanner, and how to make basic scans. It also leads you through the EPSON scanner software installation, tells you how to use the Start Button function, and how to make basic software settings.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 FRONT.FM Pass 3 ® Color Image Scanner All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi FRONT.FM Pass 3 Declaration of Conformity Manufacturer: Address: SEIKO EPSON CORPORATION 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Representative: Address: EPSON EUROPE B.V. Prof. J. H.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 PERF1200.TOC Pass 3 Contents Safety Instructions Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warnings, Cautions, and Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 For United Kingdom Users . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 PERF1200.TOC Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Connecting the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Installing the Scanner Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Chapter 3 Installing the Software System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For PCs . . . . . . . . . . . . . . . . . . . . . . .
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 PERF1200.TOC Pass 3 Setting Up EPSON Scanner Monitor . . . . . . . . . . . . . . . . . . . . . . . 5-8 Setting Up the Start Button Feature for Windows 98. . . . . . . . . . 5-12 Chapter 6 Options Using the Film Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Unpacking the Film Adapter . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 PERF1200.TOC Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Sizing Up Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RAM and hard disk size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accelerator boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Video cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 INTRO.FM Pass 3 Safety Instructions Important Safety Instructions Read all these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. ❏ Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill liquid on the scanner.
L R4C448 Rev. C A5 size 2/11/00 INTRO.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi If the power cord or plug is damaged; if liquid has entered the scanner; if the scanner has been dropped or the case damaged; if the scanner does not operate normally or exhibits a distinct change in performance. (Do not adjust controls that are not covered by the operating instructions.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 INTRO.FM Pass 3 ENERGY STAR Compliance As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
L R4C448 Rev. C A5 size 2/11/00 INTRO.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol (G). The blue wire must be connected to the terminal in the plug marked with the letter N. The brown wire must be connected to the terminal in the plug marked with the letter L.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP1.FM Pass 3 Chapter 1 1 Getting to Know Your Scanner Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Unpacking the Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Scanner Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 CHAP1.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Features The EPSON Perfection 1200U/Perfection 1200S/Perfection 1200PHOTO scanner offers the following features: ❏ Optical resolution of 1200 dots per inch (dpi) for main scanning, and 2400 dpi with micro step for sub scanning (36bit input, 24-bit output). ❏ Start Button control for shortcut scanning operation.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP1.FM Pass 3 Unpacking the Scanner Your Perfection 1200U/Perfection 1200S/Perfection 1200PHOTO comes shipped with CD-ROMs which include the driver software that runs your scanner, and some additional items, depending on your scanner model.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP1.FM Pass 3 Note: The Perfection 1200PHOTO comes with the Film Adapter which is also available as an option for Perfection 1200S/Perfection 1200U. Depending on the country of purchase, the power cord may come attached to the scanner. The shape of the AC plug also varies, so make sure the plug included is the correct shape for the electrical outlet in your country.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP1.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP1.FM Pass 3 Lights and Buttons The scanner has one indicator light and two buttons. Light Pattern Color Scanner Status F Green Initializing or busy scanning. N Green Ready to scan images. F Red or Orange An error occurred. See Chapter 7 Maintenance and Troubleshooting on page 7-9 for more information. N/A The scanner is turned off.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP1.FM Pass 3 Buttons 1 Button Function P Operate Turns the scanner on and off. ] Start The hardware switch to execute scanning and transfer the scanned image to assigned application software. To use this feature, you need to setup software. See Chapter 3 for more details.
L R4C448 Rev. C A5 size 2/11/00 CHAP1.FM Pass 3 1-8 Getting to Know Your Scanner Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Chapter 2 Setting Up the Scanner Choosing a Place for the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Installing a SCSI Interface Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Releasing the Transportation Lock . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Plugging in the Scanner . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Choosing a Place for the Scanner Follow the guidelines below when selecting a location for your scanner: ❏ Place the scanner on a flat, stable surface. The scanner will not operate properly if it is tilted at an angle. ❏ Place the scanner close enough to the computer for the interface cable to reach it easily.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 2 460 mm 100 mm or more 90 mm* 427 mm 287 mm * When document cover is closed. ❏ Keep the scanner away from high temperatures, humidity and excessive dirt or dust. Also avoid using or storing the scanner in places subject to rapid changes of temperature and humidity. ❏ Keep the scanner away from direct sunlight and strong light sources.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Installing a SCSI Interface Board For Perfection 1200S model users only. Unless your computer already has a SCSI board installed, you need to install a SCSI board and SCSI software before installing the scanner driver and software applications.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Releasing the Transportation Lock Before connecting the scanner to a power source, you must release the transportation lock. 1. Place the scanner on a flat, stable surface with the back facing you. 2. Turn the transportation lock on the right side to the unlocked position using a coin or similar object, as shown below.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Plugging in the Scanner 1. Make sure that the scanner is turned off. The scanner is off when the P operate button is not pushed in beyond the surface of the front panel. 2. If the power cord is not attached to the scanner, connect it to the AC inlet on the back of the scanner, and plug the other end into a properly grounded electrical outlet.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Initialization Before connecting the scanner to your computer, follow the steps below to make sure that the scanner is operating properly. 1. Open the document cover so you can see the operation of the scanner during initialization (startup). 2. Turn on the scanner by pressing the P operate button. The operate light starts flashing. 3.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Note: When the scanner is ready, the fluorescent lamp will also stay on, but the scanner will turn off the fluorescent lamp if it does not receive any commands from computer within 14 minutes. Connecting the Scanner (SCSI) to Your Computer For instructions on connecting your SCSI model scanner to your computer, read this section.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 For Macintosh users: Your Macintosh may or may not have SCSI ports, depending on which model you own. If you have a new Power Macintosh G3, you need to install the SCSI board and driver that came with your scanner by following the included instructions. Also, see “Installing a SCSI Interface Board” on page 2-4.
R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi SCSI Cables You may need to purchase SCSI cables before setting up your SCSI daisy chain. Be sure the SCSI cable connectors are suitable for your hardware, depending on the maker of your SCSI device and SCSI interface board.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Setting the terminator switch The scanner has a built-in terminator, which allows SCSI devices to communicate properly with each other. You may need to change the terminator switch setting according to your computer system. Note: Do not use an external terminator. The terminator switch is located at the rear of the scanner.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP2.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 c Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Caution: Do not connect the scanner to the computer or other devices while they are turned on as damage may occur. 2. Connect one end of the interface cable to one of the scanner SCSI connectors until the locks on both sides snap in.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Power-on sequence Keep the following in mind every time you turn on your computer and SCSI devices, including the scanner. ❏ Be sure to turn on the SCSI device which is connected at the farthest end of the daisy chain first, then the second farthest and so on, until finally your computer.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Power-off sequence Keep the following in mind every time you turn off your computer and SCSI devices. ❏ When you are finished using your system, turn off your computer first, then the scanner and other SCSI devices in reverse order of the power-on sequence.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Understanding USB connections USB Cables USB cables enable you to connect or remove peripherals to and from your computer easily, without having to shut down and restart the system each time a peripheral is plugged in or unplugged. You do not have to set an ID number or a terminator. Note: Do not connect or disconnect USB cables when the scanner is in use.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Connecting the scanner To connect the scanner to your computer or USB hub: 1. Connect one end of the cable (Type B) to the USB port on the back of the scanner. 2. Connect the other end of the cable (Type A) to the USB port on your computer, or USB hub.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 Note: ❏ USB cables enable you to connect the scanner whether your computer is on or off. If you connect the scanner while your computer is on, the “Add New Hardware Wizard” dialog box (Windows) or a message telling you that the scanner driver needs to be installed (Macintosh) will appear.
L R4C448 Rev. C A5 size 2/11/00 CHAP2.FM Pass 3 2-20 Setting Up the Scanner Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Chapter 3 Installing the Software System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 For PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 For Macintosh computers and SCSI model users . . . . . . . . . 3-3 For Macintosh computers and USB model users. . . . . . .
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP3.FM Pass 3 System Requirements Before installing the scanner software, make sure that your system meets the following requirements. For PCs For Windows and SCSI model users Scanner: EPSON Perfection 1200S System: Microsoft ® Windows ® 95, Windows ® 98, or Windows NT ® 4.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP3.FM Pass 3 Display: Color Monitor, 640 × 480 screen resolution (or higher recommended), and 256 color (32,000 color or higher recommended) Note: Color and tone reproduction are subject to the display capability of your computer system, including the video card, display monitor, and software. See the product documentation for details.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Installing the Scanner Software for Windows After connecting the scanner to your computer, install the scanner software from the CD-ROM. The installation steps differ depending on the version of Windows. Find instructions for Windows 98 users in this section. Instructions for Windows 95 and NT 4.0 users can be found in “For Windows 95 and Windows NT 4.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 3. When the dialog box below appears, insert the scanner software CD in the CD-ROM drive, then click Next. 4. Select the Search for the best driver for your device option, then click Next.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 5. Make sure the Specify a location check box is selected, then browse and select or type in the CD-ROM drive letter, Epson folder, the folder of your preferred language, and Win98 folder as the location, as shown below, and click Next. 3 6. Follow the instructions on the screen. You may be asked to insert the Windows 98 CD-ROM.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Make sure that the correct CD-ROM drive letter and the Win98 folder are specified in the Copy files from: box as shown below. 7. The EPSON Screen Calibration utility automatically starts. Follow the instructions on the screen. For details, see page 3-25.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 This completes the EPSON TWAIN installation, next you will install utility and application software from the CD-ROM. 1. Double-click the My Computer icon. 2. Double-click the CD-ROM drive icon. A dialog box asking for your preferred language appears on your screen. If no dialog box appears, click the Cdsetup.exe icon. 3.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi ❏ You will find the Scanners and Cameras icon shown below in the Control Panel after EPSON TWAIN is installed. USB users 1. Make sure that the scanner is turned on. 2. Turn on the computer, and start Windows. Note: You do not necessarily have to follow steps 1 and 2 above in that order.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 3. When the dialog box below appears, insert the scanner software CD in the CD-ROM drive, then click Next. 3 4. Select the Search for the best driver for your device option, then click Next.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 5. Make sure the Specify a location check box is selected, then browse and select or type in the CD-ROM drive letter, Epson folder, the folder of your preferred language, and Win98 folder as the location, as shown below, and click Next. 6. Follow the instructions on the screen. Depending on your system, you may be asked to insert the Windows 98 CD-ROM.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Make sure that the correct CD-ROM drive letter and the Win98 folder are specified in the Copy files from: box as shown below. 3 7. The EPSON Screen Calibration utility automatically starts. Follow the instructions on the screen. For details, see page 3-25.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi This completes the EPSON TWAIN installation, next you will install utility and application software from the CD-ROM. 1. Double-click the My Computer icon. 2. Double-click the CD-ROM drive icon. A dialog box asking for your preferred language appears on your screen. If no dialog box appears, click the Cdsetup.exe icon. 3.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 ❏ You will find the Scanners and Cameras icon shown below in the Control Panel after EPSON TWAIN is installed. 3 For Windows 95 and Windows NT 4.0 users 1. Make sure that the scanner is turned on. 2. Turn on the computer, and start Windows. If you are using Windows NT 4.0, insert the scanner software CD in the CD-ROM drive. Go to step 3.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi ❏ If the dialog box below appears, insert the scanner software CD in the CD-ROM drive. Select Driver from disk provided by hardware manufacturer, then click OK, and Browse. Select the CD-ROM drive, Epson folder, the folder of your preferred language, and Win95 folder, then click OK. Go to step 3.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 ❏ If the dialog box below appears, insert the scanner software CD in the CD-ROM drive, then click Next. 3 When you are asked for the drive and folder, select the CDROM drive, Epson folder, your language preference, and Win95 folder. An example is shown below.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi When the following dialog box or similar appears, click Finish. 3. Double-click the My Computer icon. 4. Double-click the CD-ROM drive icon. A dialog box asking your preferred language appears on your monitor. If no dialog box appears, click the Cdsetup.exe icon. 5. Select your preferred language and click OK. 6. You will see the following dialog box.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 7. You will see the list of software in the list box. Click to select the names of the software you want to install in your PC. Make sure EPSON TWAIN and PageManager for EPSON are selected. Descriptions of the software can be found in Chapter 4, or on the CD-ROMs that come with your scanner. 8. Click OK. Then follow the instructions on the screen.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 11. Click Test to check the connection. If everything is properly installed and connected, Status: Device Ready appears under Scanner Information in the dialog box. If the “Device Ready” message does not appear, see Chapter 7, “Maintenance and Troubleshooting.” 12. Click OK to close the EPSON TWAIN 4 dialog box.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Upgrading from Windows 95 to Windows 98 Before you upgrade from a Windows 95 operating system to Windows 98, you need to uninstall EPSON TWAIN. Follow the steps below. 1. Click the EPSON Scanner Monitor icon in the task bar and select Close to close EPSON Scanner Monitor. 2. Click the Start button, highlight Settings, and then select Control Panel.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 3. Double-click the Add/Remove Programs icon. Select EPSON TWAIN 4 and click the Add/Remove button. Then follow the instructions on the screen. After you uninstall EPSON TWAIN, upgrade to Windows 98, then install EPSON scanner software as described on page 3-5.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Installing the Scanner Software for Macintosh After connecting the scanner to your Macintosh computer, install the EPSON scanner software; EPSON TWAIN, EPSON Scanner Monitor, PageManager for EPSON and other application software from the CD-ROM. Follow the steps below. 1. Make sure your scanner is on. Then turn on the computer. 2.
L R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 4. Double-click the EPSON TWAIN 4U Installer icon. 5. The installer software shows a dialog box. Click Install in the dialog box that appears, and follow the instructions on the screen. When you have finished the entire installation, the EPSON Screen Calibration utility automatically starts.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP3.FM Pass 3 7. Double-click the installer icon to start the installation program. Then follow the instructions on the screen. Calibrating Your Screen You must calibrate your screen and scanner to reproduce images identical to the originals. Note for Windows 98 and Macintosh users: The introductory Screen Calibration dialog box will not appear.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP3.FM Pass 3 2. In the following or similar dialog box, move the slider to the right or left until the two shades of the gray horizontal stripes match. r Note: View the screen from a distance. The gray stripes will not perfectly blend together; however, try to make the two tones match as closely as possible. 3. Click OK to register the calibration setting. 4.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Chapter 4 Using Your Scanner Scanning Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Placing a Document on the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Removing the Cover for Thick or Large Documents . . . . . . . . . . . 4-6 Starting EPSON TWAIN . . . . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Scanning Procedure This chapter shows you how the scanner operates. The basic procedure for scanning is as follows: 1. Turn on the scanner. (Keep in mind the “Power-on sequence” on page 2-15.) 2. Place the document you want to scan on the document table. (This is described in detail in the next section.) 3. Run the scanner software and scan.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 2. Turn on the computer and make sure that the scanner's operate light is on, but has stopped flashing. 3. Open the document cover.
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 4. Place the document on the document table, with the side to be scanned facing down. Make sure that the document is carefully aligned. corner of the document Note: An area approximately 3mm in from both horizontal and vertical edges of the document table glass will not be scanned. 3mm (approx.) 3mm (approx.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 5. Close the document cover gently so that the document does not move. 4 Note: ❏ Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy and out of focus. Also be sure to close the document cover to prevent interference from external light. ❏ Always keep the document table clean.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP4.FM Pass 3 Removing the Cover for Thick or Large Documents For thick materials or documents that are larger than the document table, remove the document cover. First, open the document cover. Then, pull the cover straight up.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Note: When scanning with the cover removed, do not leave any area of the document table exposed to prevent interference from external light. When you are finished scanning, replace the document cover in the reverse order that you removed it.
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Starting EPSON TWAIN There are two ways to scan; with an application that supports TWAIN, or with the ] Start button and preassigned application software. If you .. ❏ use an application that supports EPSON TWAIN to scan, open your application (see “Starting EPSON TWAIN through your application software” below).
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Note: You usually need to perform this step only the first time you use the scanner with your application. 3. Choose Acquire from the File menu to open EPSON TWAIN. To scan, see the next section.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP4.FM Pass 3 The following sections give an overview of EPSON TWAIN. Note: Some settings may appear dimmed and cannot be selected because of your choice of settings. Scanning From the Easy Menu Easy menu The Easy menu displays the minimum required settings only, allowing you to scan easily and quickly.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Document Source When using the document table of the scanner, leave the Document Source set to Flatbed. Other selections are available depending on what is installed. These are Auto Document Feeder (the optional Automatic Document Feeder), and TPU for Neg. Film or TPU for Pos.
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Image Type Use the Image Type list to select the type of image to be scanned. Image Type list (predefined settings) The Image Type list provides the following predefined settings. Click the arrows on the right to view all of the available settings.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 OCR: Black and white, best quality, and Text Enhancement Technology Copy & Fax: Black and white, hard halftone, draft quality, and Auto Area Segmentation Destination Select the destination, or output device, where the scanned image is to be printed or displayed using the Destination list.
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi EPSON Stylus Printer (Fine or Photo): If you are using an EPSON Stylus printer and are printing scanned images with the Economy, Normal, or Fine Print Quality settings in your printer software, selecting EPSON Stylus Printer (Fine) is recommended. If you are printing with the SuperFine or Photo Print Quality settings, select EPSON Stylus Printer (Photo).
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 The Advanced menu allows you to make detailed settings viewing the effects on the images in the Preview window. You can set parameters for a setting or select special functions provided with EPSON TWAIN to attain the highest quality scanned images.
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi ❏ To preview a part of the image that is already in the Preview window, click and drag the mouse over the area you want to see in detail, and click the zoom preview button. Note: ❏ You cannot preview an image that exceeds available memory or disk space. If you attempt to preview an image that is too large, an alert appears on the screen.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Modifying the preview image Preview window 4 You can see the effects of the following settings in the preview image.
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Saving the Scanned Image ❏ To save a scanned image in your application, choose Save or Save As from the File menu. For details, see your application documentation. ❏ To save a scanned image in PageManager for EPSON, follow the steps below. Note: Parenthesized words in the following steps apply to Macintosh users. 1. Choose Save As from the File menu.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 2. Select the folder where the image will be saved. 3. Type a filename for your image in the File Name (Save as) field. 4. Select the file format you want to save the image in from the Save as type field. 5. Click OK (Save).
L R4C448 Rev. C A5 size 2/11/00 CHAP4.FM Pass 3 4-20 Using Your Scanner Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Chapter 5 Using the Start Button The Start Button Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 PageManager for EPSON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Target applications in the Scan Buttons bar . . . . . . . . . . . . . . 5-2 Assigning an application to the Start button . . . . . .
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi The Start Button Feature The Start Button feature allows you to scan and send data to a target application with a single push of your scanner’s ] Start button. The following sections will help you set up your PageManager for EPSON and EPSON Scanner Monitor software, or Windows 98 system, so you can begin to use the Start Button feature.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 PageManager for EPSON also allows you to assign any one of the applications or devices on the Scan Buttons bar to the ] Start button. This means that an image can be scanned and sent straight to your selected application with one simple push of the ] Start button.
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 2. Click the Start Button Settings tab in the Scan Buttons Setting dialog box. The following dialog box appears. The icons in Select target application correspond to the icons in the Scan Buttons bar and represent the possible target devices and applications. 3. Select an application from the Select target application box and click OK.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Adding Applications to the Scan Buttons Bar You can add applications appearing in the Application bar at the bottom of the PageManager window to the Scan Buttons bar. Follow the steps below. 1. Select Scan Buttons Setting from the File menu. You will see the following dialog box. 5 2. Specify the name of the setting in the Name box. 3.
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi To remove an application assigned to the Scan Buttons bar, select the application in the box on the left of the dialog box and click Remove. Then click OK. Suppress TWAIN User Interface check box When this check box is selected, the EPSON TWAIN dialog box does not appear when you scan, and the scanner works according to the settings in PageManager.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 The Register Application Wizard dialog box appears. 5 2. Specify the application’s name, location and icon and click Next>. 3. Specify the format of the image and click Finish.
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Setting Up EPSON Scanner Monitor EPSON Scanner Monitor is software that recognizes when the ] Start button is pressed and sends information to assigned application software supporting the Start Button feature and EPSON Scanner Monitor, such as PageManager for EPSON.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 ❏ Turning off Scanner Monitor If you want to turn off Scanner Monitor, select Close. However, this will disable the scanner’s Start Button feature. 5 Note: After you turn off Scanner Monitor, it will turn back on automatically the next time you start Windows.
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi For Macintosh users Select Epson Scanner Monitor Setup from the Apple menu. ❏ Turning off Scanner Monitor If you want to turn off Scanner Monitor, clear the Enable Monitoring check box. However, this will disable the scanner’s Start Button feature. To activate Scanner Monitor again, select the Enable Monitoring check box.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 ❏ Assigning an application to Scanner Monitor Click Browse. Select a folder and an application that supports the Start Button feature and EPSON Scanner Monitor, such as PageManager for EPSON.
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Setting Up the Start Button Feature for Windows 98 Without having EPSON Scanner Monitor installed, Windows 98 allows you to use the ] Start button on your scanner without having to open an application that supports the Start Button feature.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 1. Select your scanner from the installed scanners and cameras list in the Scanners and Cameras Properties dialog box. Click Properties, and then click the Events tab. 5 2. You can see the Start Button is listed as the scanner event.
L R4C448 Rev. C A5 size 2/11/00 CHAP5.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Disabling the Start button If you need to disable the Start Button feature, select the Disable device event check box in the EPSON Perfection 1200 Properties dialog box. When this check box is clear, Windows 98 will detect if the ] Start button is pressed and launch the application you selected in the Send to this application list.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Chapter 6 Options Using the Film Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Unpacking the Film Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Installing the Film Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Scanning transparent materials . . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Using the Film Adapter The Film Adapter (B81317✽) enables you to scan of negative film strips and slides simply by installing the unit on your scanner. The Film Adapter is compact so it can be attached or removed easily when you alternate scanning between transparent materials and normal reflective (paper) documents.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Installing the Film Adapter Follow the steps below to install the Film Adapter on the scanner. 1. Make sure the scanner is turned off. 2. Remove the document cover from the scanner by opening it and pulling it straight up. (See page 4-6) 3. Place the Film Adapter on the document table so that the hinges face the rear of the scanner and it fits on the table.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 5. Turn on the scanner. 6. Turn on the Film Adapter. Scanning transparent materials By attaching the Film Adapter, you can scan transparent materials, such as, positive and negative film, by passing light through the material. The following sections explain how to scan transparent materials. Film holders Four film holders are included with this unit.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 35 mm negative or positive film Insert a strip of film in the 35 mm film holder, base side facing down. 35 mm negative film (to be scanned from EPSON Instant Photo Print) Insert a strip of film in the 35 mm film holder for use with EPSON Instant Photo Print, base side facing down.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 120/220 (6 cm x 9 cm) film Insert film in the 120/220 (6 cm x 9 cm) size film holder, base side facing down. 4 x 5 inch film Insert film in the 4 × 5 inch film holder, base side facing down. Loading slides and film You can scan slides and film strip in the 4 × 5 inch (101.6 × 127 mm) scanning area of the Film Adapter.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 ❏ You need to select TPU for Neg. Film or TPU for Pos. Film in the Document Source settings in EPSON TWAIN depending on the type of film (negative or positive) you are scanning. The scanner software automatically controls the operation of the Film Adapter. Follow the steps below to load film or slides.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi ❏ If you are scanning 35 mm strip film, use the 35 mm film holder to set the film. Note: Place the film holder on the document table in alignment with the upper left-hand corner of the Film Adapter. ❏ If you are scanning 35 mm strip film using EPSON Instant Photo Print, use the 35 mm film holder for use with EPSON Instant Photo Print to set the film.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Note: Place the film holder on the document table in alignment with the upper right-hand corner of the Film Adapter. ❏ When scanning 120/220 (6cm × 9cm) or similar film, use the film holder as shown below. 6 ❏ If the film size is 4" × 5" or similar, use the film holder as shown below.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi ❏ If you are scanning slides or transparencies which will not fit in the film holders, place them directly on the document table. ❏ If you are scanning slides or transparencies using EPSON Instant Photo Print, place them one at a time directly on the document table in alignment with the upper righthand corner of the Film Adapter. 3. Close the unit.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Note: ❏ Make sure the unit is completely closed, otherwise an option error results and you cannot scan the document, nor attain proper colored images. ❏ When previewing images on EPSON TWAIN of negatives scanned using a film holder, the color may appear odd as the frame of the film holder is perceived as white, causing your scans to appear darker.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi ❏ Leave the opening shown below uncovered, otherwise the colors in your scans will be affected. opening Scanning normal (reflective) documents When you return to scanning normal reflective documents, you can simply turn off the Film Adapter, then place documents between it and the document table.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Using the Automatic Document Feeder The Automatic Document Feeder (B81314✽) allows you to automatically load multiple-page documents into your scanner. This document feeder is particularly useful for OCR (optical character recognition) scanning, or for creating an image database.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Installing the Automatic Document Feeder Follow the steps below to install the Automatic Document Feeder on your EPSON scanner. 1. Make sure your scanner is turned off, and unplug the scanner’s power cord. 2. Remove your scanner’s document cover by opening it and pulling it straight up. (See page 4-6) 3.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 5. Attach the Automatic Document Feeder’s connector to the scanner’s option connector. 6. Attach the paper support to the Automatic Document Feeder. Note: After you install the Automatic Document Feeder, be sure to select Automatic Document Feeder in the Document Source settings in EPSON TWAIN.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Loading paper into your Automatic Document Feeder Your Automatic Document Feeder can automatically load up to 20 sheets of the following paper sizes (based on a paper weight of 17 lbs and a stack thickness of 4.0 mm or less): Checks 85 × 127 mm (3.3 × 5 inches) B5 182 × 257 mm (7.17 × 10.1 inches) A4 210 × 297 mm (8.27 × 11.69 inches) Letter 215.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 2. Insert the paper stack into the Automatic Document Feeder until it meets resistance. Make sure that the side you want to scan is facing up. Then move the right edge guide so it is flush with the right edge of your paper. 6 Documents are output into the lower tray after scanning is finished.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Note: ❏ Opening the Automatic Document Feeder or its cover while it is operating results in an option error and paper feeding stops. ❏ Always close the Automatic Document Feeder and its cover before scanning. If you are scanning thick material or documents of more than 2 cm in height, the Automatic Document Feeder can be left in the upright position.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 3. Select EPSON TWAIN 4 for Windows or Macintosh SCSI users or EPSON TWAIN 4U for Macintosh USB users from Select Source of PageManager’s File menu depending on your scanner configuration. 4. Select Acquire from File. 5. In the dialog box of EPSON TWAIN, make sure that Auto Document Feeder is selected from the Document Source list.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 5. Set document(s) to be scanned in the Automatic Document Feeder, including the ejected document. 6. Choose your settings in EPSON TWAIN and click the Scan button. Refer to HTML Scanner Software Reference Guide for details on choosing EPSON TWAIN settings. After scanning the entire stack of documents, a window with thumb-nail images appears.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 3. Then slowly pull the jammed paper out of the feeder mechanism. (Be careful not to pull too hard; the paper may tear, making it more difficult to remove.) 4. If paper is still jammed inside the mechanism, open the cover to remove it. 5. After removing jammed paper, make sure that the cover is closed, and the feeder mechanism is clicked down into place.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP6.FM Pass 3 Document specifications Size: Width 3.3 to 8.5 inches (85 to 216 mm) Length 5 to 14 inches (127 to 356 mm) Thickness: 0.07 to 0.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 Other precautions Do not feed photographic sheets or valuable original artwork into the Automatic Document Feeder as misfeeding a document may result in accidental wrinkling or damage. When you are scanning high-quality color or halftone documents, it is recommended you open the Automatic Document Feeder and scan documents individually.
L R4C448 Rev. C A5 size 2/11/00 CHAP6.FM Pass 3 6-24 Options Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Chapter 7 Maintenance and Troubleshooting Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Cleaning the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Replacing the fluorescent lamp . . . . . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Maintenance Cleaning the scanner To keep your scanner operating at its best, you should clean it periodically, as described below. 1. Unplug the power cord. 2. Clean the outer case with mild detergent and water. 3. If the glass of the document table gets dirty, clean it with a soft dry cloth.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Replacing the fluorescent lamp The luminosity of the fluorescent lamp declines over time. If the lamp breaks or becomes too dim to operate normally, the scanner stops working and the operate light rapidly flashes red. When this happens, the lamp assembly must be replaced. For details, contact your dealer. c Caution: Never open the case of the scanner.
L R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Removing the paper path guide 1. Turn off the scanner. 2. Disconnect the cable for the Automatic Document Feeder, and take the Automatic Document Feeder off the scanner. 3. Take off the paper support.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 4. Put the Automatic Document Feeder on the table upside down. 5. Unclip the two white hooks to release the paper path guide. Pull the hooks out of the through holes. 6. Remove the paper path guide.
L R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Cleaning the paper path guide Gently wipe off dust from the transparent plastic sheet of the paper path guide with a soft dry cloth. c Caution: ❏ Be careful not to scratch or damage the paper path guide. ❏ Be careful not to touch the rollers or metal parts of the Automatic Document Feeder, as damage may occur. Attaching the paper path guide 1.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 2. Insert the hooks into the rectangular through holes until they clip into place. Transporting the Scanner If you are transporting the scanner a significant distance or storing it for an extended period, follow the steps below to secure the carriage. 1.
L R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Note: If you are using the Film Adapter and it is switched on, the carriage will not move to the home position. Remove the Film Adapter first, then perform the steps above. Problems and Solutions This section divides scanner problems into seven categories: Error indicator . . . . . . . . . . . . . . . . . . . . . . . page 7-9 Operating problems . . . . . .
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 Error indicator If an error occurs, the scanner stops operating and the operate light shows the type of error. Pattern of light Problem and solution F (Rapidly flashing red) Cause 1: The interface setup is wrong, or the scanner is not properly connected to the computer. What to do 1: Check the interface connection.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Operating problems Problems you may have while using the scanner often involve the operation of your software and computer. Operation problems usually occur because of: ❏ Incorrect setup of the interface (see Chapter 2). ❏ Inappropriate selection of the scanner functions (see your software documentation).
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Interface port or software settings are incorrect. For SCSI model users : SCSI ID or terminator is incorrect . Interrupt settings are conflicting with your SCSI board. For USB model users : More than one hub is in use, or the cable is unsuitable. R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Make sure your interface port and software settings are correct.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 The scanner software does not work properly. Cause What to do Software is not installed properly. Make sure your software is installed correctly. For Windows 98 users: Check if your scanner is listed more than once in the Scanners and Cameras Properties dialog box. To view the dialog box, double-click the Scanners and Cameras icon in Control Panel.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 Quality problems The entire image is distorted or blurred. Cause What to do Document is not placed correctly. Make sure the document is flat against the document table. Document was moved. Make sure you do not accidentally move the document during scanning. Scanner orientation is unsuitable. Make sure the scanner is on a flat, stable surface.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Colors are patchy or distorted at the edges of the image. Cause What to do The document is too thick or warped, or there is too much outside light. A document that is very thick or warped at the edges can cause discoloration. Cover the edges of the document with paper to block outside light. The document is not placed correctly.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 Straight lines in the image come out jagged. Cause What to do Document is not placed correctly. Make sure the document orientation is perfectly straight on the document table. Align vertical and horizontal lines with the scales at the top and side of the document table. The image does not look the same as the original.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 A line of dots is always missing from the scanned image. Cause What to do The print head has malfunctioned. Print head malfunction is indicated when a line is missing on printouts only. See your printer manual. The scanner sensor has malfunctioned. Scanner sensor malfunction is indicated when a line is missing on both screen images and printouts.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 Document is not positioned correctly. Move or angle the document slightly. Unsharp Mask is selected. Clear the check from the Unsharp Mask check box in EPSON TWAIN. Image size setting is unsuitable. Change the image size smaller slightly. Colors differs from the original or look strange. Cause What to do Screen is not calibrated.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Colors on your monitor are different from those in the original image. Cause What to do Software image settings need adjustment. Check the image settings of your scanner software, especially data format (bits, pixel, color), gamma correction, and color correction. Try different combinations of these settings.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 The printed image is larger or smaller than the original. Cause What to do Printed size was judged using the monitor image. The image size settings of your software determine the size of the printed image. Do not use the size of the monitor image to judge the printed size. Scanned images cannot be printed or come out garbled when printed.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Using the film holder frame. The dark area around the film, such as the frame of the film holder, is perceived as white, which alters the exposure of the scanning area and causes scans to appear darker. See the correct color by clicking and dragging the mouse over an area, and then clicking the zoom preview button.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Connection sequence is incorrect. R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Check the connection sequence and make sure the scanner’s terminator switch is set correctly. See Chapter 2 for details. The Scanner Status does not indicate “Device Ready” after you click Test in the EPSON TWAIN 4 dialog box or the Scanner’s Properties dialog box (Windows 98) in the Control Panel.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Film Adapter is not switched off. If the Film Adapter is installed, make sure it is switched off. Software operation problems You cannot start EPSON TWAIN. Cause What to do Scanner is switched off. Turn on the scanner and then turn on the computer. Interface cable is unsuitable.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Software is not installed properly and EPSON TWAIN 4 or 4U does not appear in the TWAIN Data Source list. R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Make sure your software is installed correctly. For Windows 98 users: Check if your scanner name appears under Imaging Device hardware type without a ? or ! mark in the Device Manager menu.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Scanning problems Image is dark, with little or no detail. Cause What to do Screen is not calibrated. Calibrate the screen as described in “Calibrating Your Screen” on page 3-25. Destination setting is incorrect. Select Screen/Web as the Destination setting (page 4-13).
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 When OCR is selected as the Image Type, change OCR to Line Art, then change the Threshold setting in the Image Control dialog box. See “Image Controls” on the online Software Reference Guide. Scanned image is too large. Cause What to do Destination setting is unsuitable. Select Screen/Web as the Destination setting (page 4-13).
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi CHAP7.FM Pass 3 Scanning does not start by pressing the Start button. Cause What to do Scanner Monitor software is not installed properly. (For Windows 95, NT 4.0 and Macintosh) Make sure the Scanner Monitor software is running and check the Scanner Monitor’s Launch Application path is set correctly. Scanner Event is not selected properly.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Changing the SCSI ID number or SCSI board If you are using your scanner with Windows 98 and you want to change the scanner’s SCSI ID number or replace the SCSI board with a new one, follow the steps below. 1. Double-click the Scanners and Cameras icon in the Control Panel. 7 2. Select your scanner in the installed devices list, then click Remove.
L R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi 3. Click OK and close the dialog box. 4. Shut down Windows 98 and turn off your PC and scanner. 5. Change the SCSI ID number (see page 2-10), or replace the SCSI board (see page 2-4). 6. Turn on your scanner and then your PC. 7. Follow the instructions on the screen.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 CHAP7.FM Pass 3 Accelerator boards In addition to memory, processing speed is important because large files take longer to process than small ones. Therefore, you may want to add an accelerator board to your computer. Video cards A video card that is sufficient for text may not be good enough for displaying graphic images, especially in color.
L R4C448 Rev. C A5 size 2/11/00 CHAP7.FM Pass 3 7-30 Maintenance and Troubleshooting Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPA.FM Pass 3 Appendix A Technical Specifications Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 APPA.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Scanning Scanner type: Flatbed, color Photoelectric device: Color CCD line sensor Effective pixels: 10200 × 14040 pixels at 1200 dpi, 100% Document size: 216 mm × 297 mm (8.5 inches × 11.7 inches) A4 or US letter size (The reading area can be specified from your software.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPA.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi APPA.FM Pass 3 Electrical Input voltage range 100−120 V model 220−240 V model AC 90 to 132 V AC 198 to 264 V Rated frequency Rated current Power consumption 50 to 60 Hz 0.5 A 0.3 A Approx. 25W (operating) Approx. 10W (standby) Note: Check the label on the back of the scanner for voltage information.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPA.FM Pass 3 Safety Approvals 120V model: Safety standards EMC 230V model: Safety standards EMC UL 1950 with D3 CSA C22.2 No. 950 FCC part 15 Subpart B Class B CSA C108.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi APPA.FM Pass 3 SCSI Interface Interface type: ANSI X3T9.2/375R Revision 10L (SCSI 2) Functions: BUS FREE phase ARBITRATION phase SELECTION/RESELECTION phase COMMAND phase (Logical Unit Number is fixed to 0 and command link function is not supported.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPA.FM Pass 3 USB Interface Interface type: Universal Serial Bus Specification Revision 1.0 Configuration: Element Description Device Full Speed mode (12Mbit/s) Class : Vendor-specific Vendor ID : 0x04B8 (Seiko Epson Corp.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi APPA.FM Pass 3 Initialization Methods The scanner can be initialized (returned to a fixed set of conditions) in the following ways: SCSI model Hardware initialization * The scanner is turned on. * The scanner receives a SCSI Reset signal from the SCSI interface. Software initialization * Software sends the ESC @ (initialize the scanner) command.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPA.FM Pass 3 Film Adapter Electrical Specifications: Supplied Voltage: DC 21.6 to 26.4 V Rated current: 0.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi APPA.FM Pass 3 Automatic Document Feeder General specifications: Paper supply: Face up load Paper out: Face down eject Paper setting quantity: 20pcs (55g paper, maximum total thickness under 4 mm) Electrical specifications: Input voltage: DC 22.8 to 25.2 V DC 4.75 to 5.25 V Input Current: 24V: 0.8 A 5V: 0.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPB.FM Pass 3 Appendix B Contacting Customer Support For United Kingdom and the Republic of Ireland Users. . . . . . . . B-3 For Australian Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5 For Singapore Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6 For Hong Kong Users . . . . . . . . . . . . . .
L R4C448 Rev. C A5 size 2/11/00 APPB.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi If your scanner is not operating properly and you cannot solve your problem using the troubleshooting information in this guide or online help, contact customer support services for assistance. We will be able to help you more quickly if you are able to give the exact information indicated below.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 APPB.FM Pass 3 For United Kingdom and the Republic of Ireland Users If you purchased your product in the UK or the Republic of Ireland, EPSON (UK) LTD provides a range of customer services and technical support.
L R4C448 Rev. C A5 size 2/11/00 APPB.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi Product Model: Serial number of your product: (The serial number label is on the back of the product) Brand and model of your computer: Driver software version: (Click the About button in your driver) Operating System (for example, Windows 3.1/ 95/98, NT 3.5/ 4.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 APPB.FM Pass 3 For Australian Users EPSON Australia wishes to provide you with a high level of Customer Service. As well as this User’s Guide, we provide the following sources for obtaining information: EPSON FAXBACK EPSON FAXBACK will fax you the latest specifications and pricing for most EPSON products offered in Australia.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi APPB.FM Pass 3 EPSON Helpdesk EPSON Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators on the Helpdesk can aid you in diagnosing hardware and software problems. They can also advise you on the latest EPSON products and where the nearest dealer or service agent is located. Many types of queries are answered here.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 APPB.FM Pass 3 For Hong Kong Users To obtain technical support as well as other after-sales services, users are welcome to contact EPSON Hong Kong Limited.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi APPB.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 GLOSS.FM Pass 3 Glossary additive primary colors The colors of red, green and blue (RGB) - which give the perception of white when fully added. These are the colors of the color system used with monitors and scanners. bi-level data Image data that is composed of 1 bit per pixel.
L R4C448 Rev. C A5 size 2/11/00 GLOSS.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi default A set of values used when no other selections have been made. These are sometimes called factory defaults if the original values have not been changed since the scanner has left the factory. dithering A process in which software or an output device simulates continuous tones with groups of dots.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 GLOSS.FM Pass 3 imagesetter A device that uses computer files to produce high-resolution text and graphics output on film or paper. These are usually found in service bureaus and printing companies. impact dot printer A printer that transfers ink onto the paper by striking an ink ribbon with a number of small pins.
L R4C448 Rev. C A5 size 2/11/00 GLOSS.FM Pass 3 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi primary colors Basic colors. See additive primary colors and subtractive primary colors. resolution Indication of how finely an image is resolved into pixels. Measured in dots per inch (dpi), pixels per inch (ppi), or samples per inch (spi). scan An operation performed by the sensor and the carriage. The image is divided into pixels by scanning.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 GLOSS.FM Pass 3 USB A Universal Serial Bus. A hardware interface for connecting low-speed peripherals such as a keyboard, mouse, scanner, or printer to the computer. USB hub A device that normally provides four TYPE A sockets to increase the number of USB ports on a PC.
L R4C448 Rev. C A5 size 2/11/00 GLOSS.FM Pass 3 6 Glossary Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi R R4C448 Rev. C A5 size 2/11/00 PERF1200.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi PERF1200.
R R4C448 Rev. C Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi A5 size 2/11/00 PERF1200.
L R4C448 Rev. C A5 size 2/11/00 Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.Kauppi PERF1200.
Proof Sign-off: tanto name SEI Y.Takasaki M.Fujimori leader name M.Fujimori editor name SEI M.
EPSON OVERSEAS MARKETING LOCATIONS EPSON AMERICA, INC. EPSON UK LTD. 20770 Madrona Ave. Campus 100, Maylands Avenue, P.O. Box 2842 Hemel Hempstead, Herts, Torrance, CA 90509-2842 HP2 7TJ, U.K. Phone: (800) 922-8911 Phone: (+44) 01442 261144 Fax: (310) 782-5220 Fax: (+44) 01442 227227 EPSON DEUTSCHLAND GmbH EPSON FRANCE S.A. Zülpicher Straße 6, 68 bis, rue Marjolin 40549 Düsseldorf Germany 92300, Levallois-Perret, France Phone: (0211) 56030 Phone: 33.1.40.87.37.
Color Image Scanner Color Image Scanner User's Guide User's Guide Printed in Japan 99.06-.1 User's Guide 4010810 Cover-F DIC F 43 PANTONE327C Bk Rev.