Operation Guide

Connecting to the Projectors
17
Searching for and Connecting to the Projectors
You can search for projectors on the network using one of the following
methods.
Automatic search
A Start EasyMP Multi PC Projection.
s "Starting EasyMP Multi PC Projection" p.15
10 Projector List
Displays a list of the projectors found on the network. You can then
select projectors to connect.
The search results for each search mode (Automatic search, Manual
search, and Profile) are displayed in separate lists.
The status of each projector is indicated by an icon.
Standby Available. You can connect to the
projector.
Busy Available. Although other computers are
connected to the projector, you can also
connect at the same time.
Mirroring... Available. You can connect to a group of
multiple projectors projecting the same
image (mirroring).
s "Connecting to Multiple Projectors
(Mirroring)" p.19
Currently in
use by
another
application
Not available. The projector is displaying
the network configuration screen, or the
projector is being used by other projector
software.
Searching Not available. A Manual search or Profile
search is already being used to search for
the projector.
Not found. Not available. The specified projector
could not be found using Manual search
or Profile search.
Unsupported
Projectors
Not available. The projector is not
compatible with EasyMP Multi PC
Projection.
11 Refresh
Updates information in the Projector List.
12 Manual search box
When using Manual search, enter the projector's IP address or the
projector name.
Click the Search button to search for the specified projector.