User`s guide

128 Fine-Tuning the Projector
button). Enable
Sleep Mode if you want to have the projector
turn off automatically if it is idle (and no signal is received) for 30
minutes or when the A/V Mute Slide is Closed. Enable
High
Altitude Mode
when you are using the projector above 4900 ft
(1500 m).
■ Standby Mode
Select Network On to enable the projector to be monitored over
a network when it is in standby mode (the power light is orange).
■ USB Type B
Select Easy MP to project your computer’s display through the
projector’s Type B USB port. Choose
Link21L if you want to be
able to use the remote as a wireless mouse for a USB-connected
computer. See page 38 for more information.
■ Link 21L
This setting is available only if you select Link21L for the USB
Type B
setting. Select Off if you want to use the remote as a
wireless mouse for a USB-connected computer. See page 38 for
more information.
■ Multi-screen
Enable this option if you are using the multi-screen feature to
project from one source (one image) using multiple projectors (see
page 81). Select
Screen ID to define individual screen IDs.
Choose
Image Correction then choose an adjustment:
Brightness Correct to adjust the brightness of each display,
Color Correct to adjust the balance between red and green, or
blue and yellow. See below for more information about
multi-screen color adjustment.
■ Language
Select from nine languages to be used for the projector menus.