User`s guide

Maintaining the Projector 147

Cleaning the Air Filter and Vent

Your projector includes an air filter to ensure the best performance. If

dust collects on the air filter (on the bottom of the projector) or vent

(on the front of the projector), clean them as described below. Dust

clogs prevent proper ventilation and can cause overheating and

damage the projector.

Follow these steps:

1. Turn off the projector. Wait for the

Power light to stop flashing,

then unplug the power cord.

2. To clean the intake vent and filter, use a small vacuum cleaner

designed for computers and other office equipment. If you don’t

have one, gently clean the vent with a soft brush (such as an

artist’s paintbrush).

You can remove the air filter to clean both sides.

3. If the dirt is difficult to remove or the filter is broken, replace the

filter as described on page 150. Contact your dealer or call Epson

at 800-GO-EPSON (800-463-7766) to obtain a new filter.

note

To order replacement air

filters, request part number

V13H13408. See page 13

for ordering information.

Vent

Air filter