User`s guide

Connecting to Computers, Cameras, and Other Equipment 43

Connecting an RGB Video Source

1. Locate the VGA computer cable provided with the projector.

2. Connect the cable to the video port on your player and the

Computer/Component port on the projector.

3. If you want to play sound through the projector, see page 45 for

instructions on connecting audio cables.

4. If you don’t need to make any other connections, see page 17 for

instructions on turning on the projector and adjusting the image.

Once the projector is turned on, select the image source: press the

Search button on the remote control or press the Source

button on the projector’s control panel repeatedly until

the image appears.

note

Be sure your video player is

not a component video

source. If you select the

wrong source, image quality

may suffer. Check your

video player’s

documentation.