User`s guide

Presenting Through a Wireless Network 91
To enter numbers, use the pointer button on the remote
control to highlight the number you want to input, then press
the
Enter button. When you’re finished changing an address
in the network menu, highlight
Return, then press the Enter
button.
When you’re done making all necessary changes, press
Menu to exit
the menu system.
To connect to the projector with NS Connection using the Quick
Connection mode, see page 73. To connect to the projector using
Advanced Connection mode, see page 77.
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
Menu button on the remote control, select the
Network menu, then press Enter.
2. Choose
To Network Configuration and press Enter.
3. Choose
Mail, then press Enter.
You see the following screen: