Installation Instruction
2 Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
3 If your image looks like
or
, you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4 If your image looks like
or
, press the
or
buttons on
the projector to correct it.
PowerLite
®
1725/ 1 735W
Quick Setup
1 Turn On Your Equipment
Before using the projector, make sure you read the safety instructions in the
User’s Guide on your projector CD.
1 Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2 Open the A/V Mute slide (lens cover). Make sure the slide is
opened completely.
3 Remove the battery cover on the remote control. Locate the two AA
batteries that came with the projector and insert them. Then replace
the battery cover.
4 To turn the projector on, press the Power button on the projector
or the remote control. The projector beeps once, and the projector’s
Power light flashes green and then stays on.
To shut down the projector, press the Power button twice and simply
unplug it. You don’t have to wait for the projector to cool off.
How do you want to get images to the projector?
• To connect to a notebook, see “If
connecting to a notebook” below.
• To project over a wireless network,
see “If projecting wirelessly” on the
back of this sheet.
• To give a presentation stored on a flash drive, digital camera, or
other USB storage device, see the EasyMP Operation Guide on your
projector CD.
If connecting to a notebook...
1 Turn on the projector and adjust the image as described in sections
1 and 2 of this sheet.
2 Do one of the following:
• Connect one end of the VGA computer cable to the projector’s
blue Computer (Component Video) port.
Connect the other end to your notebook’s video-out port
or monitor port. Switch your notebook to external display.
• Connect the square end of the USB cable to the projector’s
Type B (square) USB port.
Connect the flat end of the USB cable to any available USB port
on your notebook (Windows
®
only). Click Agree to install a
one-time driver file.
3 Choose a
Presentation Method
1 To raise the image,
press the foot release
button for the front
adjustable foot and lift
the front. Release the
button to lock the foot
in position.
2 Adjust the Image
Turn over
Zoom
Focus
VGA computer cable
USB cable
(Windows only)
Power button
Power light
*411482900*
*411482900*
4114829 Rev.0
1-F C
4114829 Rev.0
1-F M
4114829 Rev.0
1-F Y
4114829 Rev.0
1-F K