User`s guide

Fine-Tuning the Projector 61
minutes or when the A/V mute slide (lens cover) is closed. Enable
High Altitude Mode when you are using the projector above
4900 ft (1500 m).
■ Standby Mode
This function is not used for the PowerLite 1810p.
■ Projector ID
Lets you assign a numeric ID to each projector. When you are
using multiple projectors, you can use the ID to select the one you
want to operate with the remote control. See page 33 for
instructions.
■ Multi-screen
Use this option if you want to color-match two or more projectors
that are being used to display images near each other. You can
make image adjustments at each of five adjustment levels. First
choose an
Adjustment Level and then adjust the settings for
each level:
Brightness Correct. to adjust the brightness, and
Color Correct. to adjust the balance between red and green, or
blue and yellow. See page 62 for more information about
multi-screen color adjustment.
■ Language
Select from nine languages to be used for the projector menus.
note
If Direct Power On is
enabled, the power cable is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
Do not use the projector at
altitudes above 7500 ft
(2,286 m).
User's Guide - 1810.book Page 61 Monday, September 10, 2007 6:39 PM