Specifications

PowerLite 1810p/1815p
20 - PowerLite 1810p/1815p 3/08
If you’ve added the program to the Startup programs folder,
then it may already be open. If so, click the icon in the system
tray on the lower-right corner of your screen to display the EMP
Monitor window:
To close EMP Monitor, select
Exit from the File menu or right-
click the program icon shown above, then select
Exit.
Note: If you want to monitor projectors while they are in standby
mode, select
Standby Mode in the Extended menu, then select
Network On.
Registering a Projector
Before you can monitor a projector, you have to register it.
Follow these steps to automatically search for your projector(s).
1. Open EMP Monitor as described above. You see this screen:
2. Select
Edit > New > Projector (automatic search). You see
this screen:
3. Click
Search to locate projectors currently operating on the
network. Any projectors found on the network are listed as
shown below:
Click here to start EMP Monitor