Specifications

PowerLite 1810p/1815p

26 - PowerLite 1810p/1815p 3/08

The lamp(s) in this product contain mercury. Please consult

your state and local regulations regarding disposal or recycling. Do

not put in the trash.

Warning: Let the lamp cool fully before replacing it. In the unlikely

event that the lamp has broken, small glass fragments may be

present and should be removed carefully to avoid injury. If the lamp

is used after the replacement period has passed, the possibility that

the lamp may break increases. When a lamp replacement message

appears, replace the lamp with a new one as soon as possible, even if

it is still working.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer

using the projector’s menus.

1. Press the

Menu button on the remote control or on the

projector’s control panel. You see the main menu.

2. Use the pointer button on the remote control (or the

arrow buttons on the projector) to highlight

Reset, then

press

Enter. You see this screen:

3. Select

Reset Lamp Hours and press Enter.

4. When you see the prompt, select

Yes and press Enter.

5. When you’re finished, press

Menu to exit the menu system.

Optional Accessories

You can purchase these accessories from an Epson authorized

reseller. To find the nearest reseller, call 800-GO-EPSON

(800-463-7766). To purchase online, visit

www.epsonstore.com (U.S. sales) or www.epson.ca

(Canadian sales).