User`s guide

100 Presenting from a USB Drive, Camera, or CompactFlash Card
Presenting Files From a USB Drive or
CompactFlash Card
This section explains how to project individual image or movie files
from a USB hard drive, flash memory drive, or CompactFlash card
using EasyMP. See page 118 for a list of the supported file formats.
Follow these steps to display images or play movies:
1. Connect your external drive or insert your CompactFlash
memory card (see page 50).
If you are using an external hard drive, plug in its power cord.
2. Turn on the projector, if it is not already on.
3. Select EasyMP as the source by pressing the
EasyMP button on
the remote control.
If you have more than one card inserted in a multicard reader, use
the pointer button on the remote control to select the card you
want to use and press
Enter.
You see your files displayed on the screen:
4. If your files are in a folder, use the pointer button on the
remote control to select the folder and press
Enter.
If your files are not in a folder, skip to step 6.