User`s guide

116 Presenting from a USB Drive, Camera, or CompactFlash Card
Presenting Scenarios
Before you begin, connect the USB drive (see page 50) or insert the
CompactFlash card containing the scenario to your projector (see
page 51).
The follow these steps to present your scenario:
1. Turn on the projector, if it’s not already on.
■ If your scenario is set to autorun, it will start as soon as the
projector warms up.
■ If your scenario is not set to autorun, you need to start it
manually. Continue with the following steps.
2. Select EasyMP as the source by pressing the
EasyMP button on
the remote control. You see a screen like the one below.
JPEG files are displayed as thumbnails. Other files or folders are
displayed as icons. A scenario icon identifies a scenario file.
3. Use the pointer button on the remote control to highlight
your scenario file and press
Enter. A drop-down menu
appears under the scenario.
4. Use the pointer button to select
Play Scenario and press
Enter. In a moment, your scenario begins playing.
note
Your files may take up more
than one screen. If so, use the
Page up and Page down
buttons on the remote
control to view all your files.