User`s guide

148 Managing Projectors
You see this screen:
3. Turn the Mail notification function setting
On.
4. Enter the IP address and port number of your network’s SMTP
(outgoing) mail server.
5. Enter the Sender (projector) mail address.
6. Enter up to three e-mail addresses to send alerts to in the
Recipient mail address boxes.
7. Click the
Notification event buttons to select the conditions
under which an e-mail alert will be sent.
8. When you’re done, click the
OK button to close the Set mail
notification function window.
Understanding the Notification Messages
If a projector experiences a problem, EMP Monitor sends an e-mail
message to each of the addresses you entered in the Set mail
notification function window.
The subject line of the message includes the projector’s display name,
shown in EMP Monitor, and the warning/error.
The body of the message contains:
■ The projector’s display name in EMP Monitor
■ The error/warning message
The problem descriptions are similar to the errors listed on page 144.
note
If a projector develops a
critical problem, it may not
be possible for it to report the
error.