User`s guide

150 Managing Projectors
■ If you set a Web control password in the projector’s Network
menu, enter it in the Password box, then click
OK.
You see this screen:
4. Select one of the menu options listed on the left, then change any
of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■ Pointer in the Settings menu
■ User’s Logo, High Altitude Mode, and Language in the
Extended menu
■ Reset All and Reset Lamp Hours in the Reset menu
Use the controls at the bottom of the screen just as you would the
corresponding remote control buttons. Choose a source, stop the
action, turn off the picture and sound, or turn the projector’s power
on or off.
Functions corresponding to remote control buttons
Menus