User`s guide

176 Solving Problems
You can’t edit scenario files in EMP SlideMaker after they
have been transferred to the USB drive.
You can only edit scenarios before they are transferred. Open the
scenario files saved on your hard drive, make any changes, then
transfer the scenario to your USB drive.
You can’t transfer your slideshow to the drive because you
aren’t able to see the drive letter.
You must connect the drive to your computer before you select Send
Scenario
from the Scenario Option(s) menu. If this happens, close
and restart EMP SlideMaker 2. Make sure your drive is connected
before you select
Send Scenario.
You can’t play your movies on the projector.
■ The projector only supports MPEG2 files. It does not support
MPEG1 files. The audio format is MPEG1 Layer 2. Linear PCM
and AC-3 audio cannot be played back.
■ If your MPEG2 movie stops playing, check the light on the
projector’s wireless module. If the light doesn’t come on, turn off
the projector and reinstall the module.
■ Movie files included in a PowerPoint presentation can’t be played
back in a scenario.
EasyMP is unable to see the image files on your camera or
external drive.
Make sure your camera or drive shows up on your desktop as a drive
letter when you connect it to your computer. If it does, it is probably a
USB-mounted device and will work with your projector. The
projector does not support TWAIN-compliant digital cameras.