User`s guide

Displaying and Adjusting the Image 27

You can manually adjust the shape of the image to compensate for

vertical and horizontal keystone distortion. First make sure the

Keystone setting in the projector’s menu system is set to

H-Keystone

V-Keystone:

1. Press the

Menu button on the remote control (or on the

projector’s control panel).

2. Select the

Settings menu and press Enter.

3. From the Settings menu, select

Keystone and press Enter.

4. Select

H/V-Keystone and press Enter.

5. Select

H-Keystone (for horizontal adjustment) or V-Keystone

(for vertical adjustment) and use the l and r arrow buttons to

adjust the shape of the image.

If the image becomes smaller, use the zoom ring to enlarge the image

so it fits the screen. If the image contains faint lines or a gridlike

pattern, decrease the sharpness setting (see page 123).

Selecting the Color Mode

The Color Mode adjusts the brightness, contrast, and color for various

common viewing environments. Use this setting to quickly obtain a

good picture.

note

The projector’s arrow

buttons may already be in

Keystone correction mode if

you haven’t used Quick

Setup or Quick Corner.

Vertical

keystone

adjustment

Horizontal

keystone

adjustment