User`s guide

Presenting Through a Wireless Network 87
4. If you are prompted for a keyword, enter the four-digit number
displayed on the EasyMP Network screen and click
OK.
The computer’s image is transmitted to the projector and appears
on the screen. See page 83 for details about using the floating
control bar on your computer desktop.
Enabling Network Security
The projector includes the following network security options which
you can enable for network projection:
■ Data encryption
Encode and transmit data. Even if data is intercepted, it cannot be
deciphered. See page 88 to enable encryption.
■ Connection limitation (Authentication)
A user’s name and a password are registered in advance, which
means that only the registered wireless port can connect to the
network and prevents unauthorized third parties from connecting to
the network.
■ Firewall
Prevents unauthorized computer access by closing ports that are
not used.The security functions that can be used with this
projector vary depending on the connection mode of the wireless
LAN. Use the firewall function provided with your OS.
The security functions that can be used with this projector vary
depending on the connection mode:
■ Quick Connection Mode
Encrypted communication
■ Advanced Connection Mode
Encrypted communication, WEP, WPA-PSK (TKIP), WPA-PSK
(AES), EAP-TLS, EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2,
PEAP/MS-CHAPv2, PEAP/GTC, LEAP,
EAP-FAST/MS-CHAPv2, EAP-FAST/GTC
note
The authentication and
firewall features are only
effective when the access
point for the connection
destination supports the
same functions.