EasyMP Multi PC Projection Operation Guide
Contents Introduction to EasyMP Multi PC Projection............................................................................................. 7 EasyMP Multi PC Projection Features ................................................................................................. 7 Connection to Various Devices........................................................................................................ 7 Four-Panel Display ..........................................................................
Controlling the Projected Display ....................................................................................................... Screen Types for Projection Control.............................................................................................. Operating the Projected Display Status......................................................................................... Changing the Number of Projected Panels.............................................................................
Set options ......................................................................................................................................... Set options - User Settings ............................................................................................................ Set options - General settings ....................................................................................................... Set options - Adjust performance .........................................................
Introduction to EasyMP Multi PC Projection See the information here to learn more about EasyMP Multi PC Projection software. EasyMP Multi PC Projection Features EasyMP Multi PC Projection Features EasyMP Multi PC Projection is software that allows you to hold interactive meetings by projecting images from network projectors. You can use a variety of display options for your environment.
You can also hold remote meetings over a network by simultaneously projecting the same image on up to four projectors on the network. Parent topic: EasyMP Multi PC Projection Features Related tasks Connecting to Multiple Projectors (Mirroring) Related topics Connection Methods Four-Panel Display You can simultaneously display up to four screens in separate projected panels, which is useful in both business and educational environments.
For example, you can compare and analyze data while simultaneously projecting screens from multiple devices. In an educational environment, you can project lesson material on one part of the screen and student answers on another to enhance the learning experience.
You can share the projector with other users on the same network without having to change cable connections, allowing users to take turns giving presentations. Note: The projection control screen may not be available on all versions of this software. Parent topic: EasyMP Multi PC Projection Features Related tasks Changing the Presenter Changing the Projection Position Moderator Function When using the moderator function, only one person plays a role of moderator who can control the projected display.
Note: This function is available only for supported models.
Setting Up EasyMP Multi PC Projection for the First Time Follow these instructions before connecting a computer to the projector over a network. Installing the Software Setting Up the Projector Installing the Software Install EasyMP Multi PC Projection from the EPSON Projector Software CD-ROM supplied with your projector (if available) or by downloading it from the Epson Web site.
Requirement Windows Mac Operating system Windows XP Mac OS X • Professional (32-bit) • 10.4.x (32-bit) • Home Edition (32-bit) • 10.5.1 or later (32-bit) • Tablet PC Edition (32-bit) • 10.6.x (32- and 64-bit) Windows Vista • 10.7.x (32- and 64-bit) • Ultimate (32-bit) • 10.8.x (64-bit) • Enterprise (32-bit) • 10.9.
Requirement Windows Mac CPU Mobile Pentium III 1.2 GHz or faster Power PC G3 900 MHz or faster (Pentium M 1.6 GHz or faster recommended) (CoreDuo 1.
4. If the installer does not start automatically, open the CD-ROM drive from My Computer (or Computer), and then double-click InstallNavi.exe. 5. Follow the on-screen instructions to install. Parent topic: Installing the Software Installing EasyMP Multi PC Projection (Mac OS X) Install EasyMP Multi PC Projection on your computer. 1. Turn on your computer. 2. Make sure all running applications are closed. 3.
Recommended Wireless Environment for Multi PC Projection When you connect a projector to a wireless LAN and connect multiple devices wirelessly, note the following recommendations. • Set up multiple access points so that one of the access points can connect up to 10 or 20 devices. See the access point manual for more information on the maximum number of devices that can be connected.
A screen like one of the following is displayed. 7. Select On for Wireless LAN Power. Note: Depending on the projector model, you may need to select Wireless LAN On as the Wireless Mode setting in the Network menu instead. 8. Select Advanced for Connection Mode. 9. Select other options as necessary for your network. See the User's Guide supplied with the projector for more details. 10. Select security settings on the Security menu as necessary for your network.
1. Contact your network administrator and check that DHCP is available under the current network environment. Note: If DHCP is not available, write down the following values that are available for your projector. • IP Address • Subnet Mask • Gateway Address 2. Connect the computer to the network. Note: To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. 3. Connect a LAN cable to the projector. 4. Turn on the projector. 5.
• DHCP is not available: Set DHCP to Off and enter the projector's IP Address, Subnet Mask, and Gateway Address values as necessary. 8. When you have finished making settings, select Setup Complete or Complete, and follow the onscreen instructions to save your settings and exit the menus.
Connecting to the Projector and Projecting Images Follow these instructions to connect the computer and the projector over a network, and to project images from your computer's screen using the projector. Make sure you have already set up EasyMP Multi PC Projection.
Note: Depending on your projector, some connection methods may not be available. See the User's Guide supplied with the projector for more details. • All users can control the projected display and become presenters. (Holding discussions and interacting with other users in a business environment.
• Only one user is the moderator and has full control over the meeting using the moderator function. (Holding a class or lesson using the participants' computer screens in an educational environment.) Note: To start a meeting using the moderator function, one user must connect to the projector as the moderator and the other users must connect to the projector as participants.
Note: Make sure you also connected a computer to the network. 1. Press the LAN button or Source Search button on the remote control to switch the input source to LAN. The LAN standby screen is projected. 2. Start EasyMP Multi PC Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Multi PC Projection, and then click EasyMP Multi PC Projection Ver.X.XX. • Windows 8 and Windows 8.
The projector search results are displayed. 4. Select the projector you want to connect to from the Projector List, and then perform one of the following operations. • All users can become presenters, or are participants in the moderator function: Make sure Connect as Moderator is not selected, and then click Join. • User is the moderator in the moderator function: Select Connect as Moderator, and then click Join.
When the connection is complete, the EasyMP Multi PC Projection toolbar is displayed on the computer screen. The computer screen for the user who connects first is projected in full screen mode. Users who connect later can project their own screen by clicking the button on the toolbar or can control the projected display from the projection control screen by clicking the button on the toolbar.
Searching for Network Projectors Automatically Searching for Network Projectors by Specifying an IP Address or Projector Name Searching for Network Projectors Using a Profile Parent topic: Connecting to the Projector and Projecting Images Search Methods You can use one of the following methods to search for the projector you want to connect to. Choose the best method depending on your environment.
Click Automatic search on the search screen. The search results are displayed. When you click Refresh, the latest information is displayed. If you cannot find any projectors, try one of the other search methods.
1. Click Manual search on the search screen. 2. Enter the IP address or the projector name for the projector you want to connect to, and then click Search.
The search results are displayed. Parent topic: Selecting the Projector Search Method Searching for Network Projectors Using a Profile You can save network projector information as a profile, and then search for the same projector using the profile instead of specifying the projector details each time.
1. Click Profile on the search screen. 2. Double-click the folder or the projector icon for the profile you want to use from the list.
The search results are displayed. Parent topic: Searching for Network Projectors Using a Profile Related tasks Registering a Profile Registering a Profile After searching for a projector, you can save the projector details as a profile using a memorable name that you can search for easily later. Note: You cannot register a profile under the Shared Profile folder on the search screen. 1. While the projectors are displayed on the search screen, perform one of the following operations.
2. Enter the Projector file name, and select the folder where you want to save the profile, and then click OK. The profile is registered and the projector information is saved in the profile. Note: • The folder structure can be six folders deep. • Click Create New folder if you want to create a new folder. • To register a specific projector, you can drag and drop the projector from the Projector List to the folder under Profile. • You can drag and drop profiles and folders to change the folder structure.
Exporting a Profile You can export a profile and share it with other users allowing them to easily search for projectors and join a meeting. Note: You cannot export the profiles under the Shared Profile folder on the search screen. 1. On the search screen, right-click the folder containing the profile you want to share under Profile, and then click Export. The Save As screen is displayed. 2. Select where you want to save the profile (.mplist), and then click Save. The profile is exported.
Sharing a Profile over a Network You can share an exported profile with other users over a network so that any changed projector information is easily updated. The shared profile is read and updated automatically when EasyMP Multi PC Projection is started. 1. Place the profile (.mplist) in a shared network location such as a server. 2. Click Set options on the search screen. The Set options screen is displayed. 3. Click the User Settings tab. 4.
Parent topic: Searching for Network Projectors Using a Profile Related tasks Exporting a Profile Controlling the Projected Display Follow these instructions to use the toolbar and the projection control screen to control the screen being projected.
• Use the projection control screen to change the number of projected panels, presenters, or the projection position. Parent topic: Controlling the Projected Display Related references Toolbar Projection Control Screen Operating the Projected Display Status You can control the projected display while projecting your computer screen by starting, stopping, or pausing the projected image. Perform one of the following operations on the toolbar or the projection control screen. • Show: Click the button.
The projected image stops. A black screen is projected while stopped. • Pause: Click the button. The projected image pauses. The paused image is projected, even if you make changes on the computer screen. Note: • These buttons are not available for participants when using the moderator function. • The moderator can also control the other users' projection using the projection control screen when using the moderator function.
2. Click the panel of the user to be projected in the projection area. The selected panel is framed in blue. 3. Perform one of the following operations to change the number of available panels in the projection area. • Project one panel in full screen mode: Click the button. • Split the projected display in two and projecting the selected panel and the adjacent right or left panel: Click the button. • Split the projected display in four and projecting the all four panels: Click the button.
• The background color for panels not being projected is gray. Parent topic: Controlling the Projected Display Related references Projection Control Screen Changing the Presenter You can change the presenter by dragging and dropping one of the connected user names in the list onto a panel in the projection area. Note: This function is not available for participants when using the moderator function. 1. Click the button on the toolbar. The projection control screen is displayed. 2.
Note: • If you cannot find the user that you want to project in the user list, you can search for them using the user search box. • You can also right-click a user name in the user list to select the projection position. • If there is no user in a white panel, a black screen is projected. The selected user's computer screen is projected. 3. To finish projecting, drag and drop the user name from the projection area to the user list.
2. Select the user in the projection area, and then drag and drop the user name into another position. The projection position is changed. Note: When the or button is selected, you can drag and drop the user name in a gray panel to the white panel to switch the image being projected. If you drag and drop the user name in a white panel to the gray panel, the image for that user will not be projected.
The connection between your computer and the projectors is ended. Note: • When you are the moderator, the Disconnect All button is displayed on the toolbar instead of this button. • You can also disconnect by clicking Leave from the Tool menu on the projection control screen. • The moderator can disconnect other participants by right-clicking the selected user in the user list, and then clicking Leave on the projection control screen when using the moderator function.
The connection between all devices and projectors participating in the meeting is ended. Note: This function is not available for participants when using the moderator function. The confirmation screen is displayed. 2. Click OK. You are returned to the search screen.
Using Additional Functions Follow these instructions to use additional EasyMP Multi PC Projection functions that may be useful during a meeting.
Note: • You can start EasyMP Multi PC Projection by double-clicking the shortcut file (.pme). The saved projectors are automatically searched for and the results are displayed on the search screen. • You can also select the projector or folder from the Profile or Projector List, and then drag and drop to the location where you want to create the shortcut.
On the search screen, select up to four projectors you want to connect to, and then click Join. A projector mirroring group is formed and the same image is projected from multiple projectors. Note: • When you select one projector from a projector mirroring group, all of the projectors in that group are selected. • When other users are already connected to a projector in a mirroring group, you can only select another projector from the same mirroring group.
2. Click the Audio Output tab. 3. Select Output audio from the projector, and then click OK. The Set options screen closes. Parent topic: Using Additional Functions Related tasks Projecting Your Screen Projecting Your Screen You can project the computer screen in full screen mode without projecting any other users' screens. 1. On the search screen, select the projector you want to connect to, and then click Join. The toolbar is displayed. 2. Click the button.
Your computer screen is projected in full screen mode. Parent topic: Using Additional Functions Changing the Moderator While using the moderator function, you can change the moderator when another user needs to control the projected display. Note: The moderator function may not be available on all versions of this software. 1. On the search screen, select the projector you want to connect to, select Connect as Moderator, and then click Join. The moderator function turns on and the toolbar is displayed. 2.
The confirmation screen is displayed. 4. Click OK. The moderator function turns off. 5. Click the Become Moderator button on the projection control screen on a different user's computer. The confirmation screen is displayed. 6. Click OK. The moderator function turns back on and the new moderator can control the projected display.
currently displayed is paused automatically when you switch the toolbar to the projection control screen. Your computer screen is projected again when you return to the toolbar. Note: This function is available only for the moderator when using the moderator function. 1. Click Set options on the search screen. The Set options screen is displayed. 2. Click the General settings tab. 3. Select Freeze projected screen when displaying Projection control screen, and then click OK. The Set options screen closes.
Solving Problems See the following sections to check for solutions to problems you may have using EasyMP Multi PC Projection. Solving Network Connection Problems Solving Problems During Projection Error Messages List Event ID List Solving Network Connection Problems Try these solutions depending on your network environment.
• Make sure the wireless LAN system of the access point supports the projector's wireless LAN system. • Check the projector's network settings. • Set the Connection Mode setting to Advanced. • Set the computer, the access point, and the projector to the same SSID. • Set DHCP to Off. When DHCP is set to On, it may take some time to enter LAN standby status if an available DHCP server is not found. • Set the IP address, the subnet mask, and the gateway address for the projector correctly.
• Make sure the projector supports the EasyMP Multi PC Projection version being used. Install EasyMP Multi PC Projection from the EPSON Projector Software CD-ROM supplied with the projector (if available) or download it from the Epson Web site. • Install the latest version of EasyMP Multi PC Projection on all computers.
Windows XP: Check Control Panel > System > Hardware > Device Manager. Windows Vista: Check Control Panel > System and Maintenance > Device Manager. Windows 7, Windows 8, and Windows 8.1: Check Control Panel > Hardware and Sound > Device Manager. • Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the necessary settings to open the ports. The ports used by this software are "3620", "3621", and "3629". • Check the software settings.
Parent topic: Solving Problems Solutions When the Computer Screen is Not Displayed Properly If there are any problems with the computer screen, try the following solutions. • If you start EasyMP Multi PC Projection while PowerPoint is running, a slide show might not run. Make sure PowerPoint is closed and then start EasyMP Multi PC Projection and a slide show.
Related tasks Changing the Moderator Solutions When Audio is Not Played Properly If there is no audio coming from the projector, try the following solutions. • Audio can only be transferred to one projector. When multiple projectors are connected to one computer, disconnect other projectors and try again. • Select Output audio from the projector on the Audio Output tab on the Set options screen.
Error Messages Remedy Cannot start this application because other EPSON Projector software (Quick Wireless Connection) is already running. Close Quick Wireless Connection and then start EasyMP Multi PC Projection. Cannot start this application because other EPSON Projector software (USB Display) is already running. Close USB Display and then start EasyMP Multi PC Projection.
Error Messages Remedy Network adapter information could not be obtained. Check the following items. • A network adapter is installed on the computer. • The driver for the network adapter being used is installed on the computer. • The network adapter is enabled. After checking, restart the computer and then restart EasyMP Multi PC Projection. If you still cannot connect, check the network settings on the computer and the network settings on the projector. Cannot start from the shortcut while projecting.
Error Messages When Searching for and Selecting Projectors Error Messages Remedy Cannot join. The maximum number of participants has been exceeded. The maximum number of devices are already connected to the projector. Disconnect users and projectors that are not projecting screens. The keyword does not match. Re-enter the keyword displayed on the projector screen. Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
Installing EasyMP Multi PC Projection (Mac OS X) Related topics Supported Resolutions and Colors Error Messages When Projecting Error Messages Remedy The projector has disconnected. An error may have occurred in the projector. Check the projector's indicator lights. A network error occurred. Try connecting again. If you still cannot connect to the projector, check the network settings on the computer and the network settings on the projector.
Error Messages Remedy Cannot import. Format not supported by this application. Check the profile you want to import. You cannot import a profile for projectors connected using Quick Connection Mode in EasyMP Network Projection. Also, you cannot import a profile when projector information has not been registered, or when the profile is corrupt. Cannot import because the folder structure exceeds six folders. The folder structure cannot exceed six layers.
Related tasks Changing the Moderator Event ID List When a connection error occurs, a number indicating the type of error is displayed as follows. Event ID: 04xx Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact Epson as described in your projector User's Guide. Event ID Cause Remedy 0432 Failed to startup the network software. Restart the projector. Network communication is unstable.
Event ID Cause Remedy 0898 Failed to acquire DHCP. Check the DHCP server to see if it is operating correctly and check the LAN cable to see if it is connected correctly. If you are not using DHCP, set DHCP to Off. 0899 Other communication errors If restarting the projector or the network software does not solve the problem, contact Epson as described in your projector User's Guide. 089A The EAP authentication type is not the same. 089B EAP server authentication failed.
Screen Summary See these sections for more information about the EasyMP Multi PC Projection screens. Search Screen Save Screen Set options Toolbar Projection Control Screen Search Screen When you start EasyMP Multi PC Projection, the search screen is displayed. 1 User name Displays the user name displayed in the user list on the projection control screen. You can edit the user name on the User Settings tab on the Set options screen.
3 Manual search Searches for projectors on the network by specifying the projector's IP address or projector name. 4 Profile Searches for projectors on the network by using the projector information saved previously. 5 Profile list Displays the registered profiles (projector information). When you double-click the profile, the projectors registered in the profile are searched for on the network. 6 Set options Displays the Set options screen. 7 Join Connects to the selected projectors.
14 Manual search box When using Manual search, enter the projector's IP address or the projector name. Click the Search button to search for the specified projector. Projector status icons in the Projector List are described in the following table. Available. You can connect to the projector. Standby Available. Although other computers are connected to the projector, you can also connect at the same time. Busy Available.
Related tasks Searching for Network Projectors Automatically Searching for Network Projectors by Specifying an IP Address or Projector Name Related topics Searching for Network Projectors Using a Profile Searching for Network Projectors Using a Shortcut Set options Save Screen When you search for projectors and save information as a profile on the search screen, the Save screen is displayed. 1 Projector file name Enter the projector file name.
2 Save in Select the folder where you want to save the profile. 3 Create New folder Creates a new folder. 4 OK Registers the projector information in the profile. Parent topic: Screen Summary Related tasks Registering a Profile Set options When you click Set options on the EasyMP Multi PC Projection search screen, the Set options screen is displayed. Note: You can also access Set options from the Tool menu on the projection control screen.
Set options - User Settings When you click the User Settings tab on the Set options screen, the following screen is displayed. User name Enter the user name displayed in the user list on the projection control screen. You can enter up to 32 characters. This setting is synchronized with the setting on the search screen. Shared Profile Name Enter the network location or URL of the shared profile (including the name of the profile) as shown below. • For a file server (Windows only): \\xxxxx\xxxxx.
Related tasks Searching for Network Projectors Automatically Sharing a Profile over a Network Set options - General settings When you click the General settings tab on the Set options screen, the following screen is displayed. Encrypt communications Select to encrypt and transmit data. Even if data is intercepted, it cannot be decrypted. Display in high resolution when dividing the projected screen in two or four Available only for projectors with a resolution of WUXGA (1920 × 1200).
Make the movement of the mouse pointer smooth Windows XP/Windows Vista/Windows 7 only Select to prevent the mouse pointer from flickering when Transfer layered window is selected in Adjust performance. (If Windows Aero is selected as the theme for Windows Vista and Windows 7, this setting turns off Windows Aero.) Freeze projected screen when Available only for the moderator when using the moderator function.
Set options - Adjust performance When you click the Adjust performance tab on the Set options screen, the following screen is displayed. Performance adjustment slider You can set the performance to Fast, Normal, and Fine. Set to Fast if movie projections are interrupted. Lower the resolution and transfer Available only for projectors with a resolution of WUXGA (1920 × 1200). Select to reduce the size of the data to be transferred to the projector by lowering the resolution.
Version Displays EasyMP Multi PC Projection version information. Restore Defaults Resets all adjustment values for Set options to their default settings, except for Switch LAN in General settings. Parent topic: Set options Related tasks Changing the Number of Projected Panels Projecting Your Screen Set options - Audio Output When you click the Audio Output tab on the Set options screen, the following screen is displayed.
Parent topic: Set options Related tasks Outputting Audio from the Projector Toolbar After EasyMP Multi PC Projection starts and a connection is made with the projector, the toolbar is displayed on the computer screen. You can use this toolbar to control the projected image and to disconnect the network connection. When using the moderator function, one of the following toolbars is displayed depending on your role of the session.
Releases Stop or Pause and projects the computer screen as it is. Show Stops projection while connected to the projector. A black screen is projected while stopped. Stop Pauses projected images while connecting to the projector. Pause Projects the screen from your computer in full screen mode without projecting any other users' screens. Project My Screen Leave Disconnects the connection between your computer and the projectors.
Projection Control Screen When you click the button on the toolbar, the projection control screen is displayed. Note: The projection control screen may not be available on all versions of this software. 1 File menu Click to select Exit to close the software. Tool menu Click to select Leave or Disconnect All. Click to select Set options to display the Set options screen. Help menu Click to select Version information. 2 Number of connections Displays the number of users connected to the projector.
4 User search box Enter the user name you want to search for, and then click the button. The search results are displayed in the user list. Click the 5 User list button to return to the original user list. Displays the user names for the computers connected to the projectors. You can connect up to 50 devices between computers that are running EasyMP Multi PC Projection and smartphones or tablets that are running Epson iProjection.
11 Screen control buttons Indicates the following status of the projector. Releases Stop or Pause and projects the computer screen as it is. Show Stops projecting. Projects a black screen while it is stopped. Stop Pauses the computer screen currently displayed. The projected display does not change, even if you make changes on the computer screen. Pause 12 Switches to the toolbar. Switch to Toolbar 13 Change projection buttons Changes the number of panels available for projecting computer screens.
Related references Search Screen Set options - User Settings Toolbar Related tasks Disconnecting Projecting Your Screen Changing the Moderator Hiding the Projection Control Screen Related topics Controlling the Projected Display 79
Appendix See these sections to learn more about EasyMP Multi PC Projection software. Updating and Uninstalling the Software Supported Resolutions and Colors Limitations Notices Updating and Uninstalling the Software Follow these instructions to update or uninstall EasyMP Multi PC Projection.
• Windows Vista and Windows 7: Click Uninstall a program from the Programs category. 5. Select EasyMP Multi PC Projection, and then do one of the following. • Windows XP: Click Change/Remove. • Windows Vista and Windows 7: Click Uninstall/Change. 6. Follow the on-screen instructions. Parent topic: Updating and Uninstalling the Software Uninstalling EasyMP Multi PC Projection (Windows 8) For Windows 8 and Windows 8.1, follow the instructions below to uninstall EasyMP Multi PC Projection.
Supported Resolutions and Colors Check these sections for the computer screen resolutions and the number of colors that EasyMP Multi PC Projection can project. Supported Resolutions Display Color Parent topic: Appendix Supported Resolutions The following computer screen resolutions can be projected. You cannot connect to a computer with a resolution greater than WUXGA.
Windows Mac OS X 16-bit color Approx. 32,000 colors (16-bit) 32-bit color Approx. 16.7 million colors (32-bit) Parent topic: Supported Resolutions and Colors Limitations Check these sections for restrictions applied when projecting computer images while using EasyMP Multi PC Projection.
Parent topic: Limitations Limitations when Projecting from Windows Photo Gallery or Windows Live Photo Gallery Note the following limitations when launching Windows Photo Gallery or Windows Live Photo Gallery when using EasyMP Multi PC Projection. • Slideshow is played back in simple mode when projecting from Windows Photo Gallery or Windows Live Photo Gallery.
• A few minutes after you connect a computer to the projector over a network with EasyMP Multi PC Projection, the following message may be displayed. It is recommended that you select Keep the current color scheme, and don't show this message again. This selection is enabled until the computer is restarted. Parent topic: Limitations Limitations when Projecting from Windows Media Center Note the following limitations when projecting from Windows Media Center.
General Notice Copyright Attribution Parent topic: Appendix Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein.
Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and multiple versions of Windows may be referred to as, for example, Windows XP/Vista, with the Windows notation omitted. • Mac OS X 10.4.x • Mac OS X 10.5.x • Mac OS X 10.6.x • Mac OS X 10.7.x • Mac OS X 10.8.x • Mac OS X 10.9.x In this guide, the operating systems above are referred to as "Mac OS X 10.4.x," "Mac OS X 10.5.x," "Mac OS X 10.6.x," "Mac OS X 10.7.x," "Mac OS X 10.8.x", and "Mac OS X 10.9.x.
