User Manual
Manuals
Brands
Epson Manuals
Printers
2100
1
2
3
4
5
6
7
8
9
10
Table Of Contents
ECO-FLO CONTINUOUS INK SYSTEM PermaJet
Assembly Instructions for: 2100 Ink System
What you will need to Install the Eco-Flo 2100
What is included in your Eco-Flo 2100 Kit
Check Printer Condition
Disconnecting Power From the Printer
INSTALLATION OF YOUR ECO-FLO KIT
Step 1 Removing the Injector Lid
Step 2 Moving the Printer Head
Step 3 Bottle Preparation
Step 4 Tube Preparation
THE WING ADAPTOR (TIP ONLY) IS GENTLY INSERTED
INTO THE BASE OF THE INJECTOR, DO NOT push the tip any further
than 3mm (see diagram opposite) otherwise this will split the base of the
injector.
Step 9 Install Chip Block & Injectors
Step 10 Positioning The Foam Block
Step 11 Installing the Central Tube Support Bracket & Aligning the Tubes
Step 13 Testing the System
Fig.2
Step 3 Bottle Preparation
Locate the coloured bottle cap
s and straight
length
s of plastic tubes. Insert the
st
raight tube firmly into the bottom of
each bottle cap see Fig.3
Fig.3
Step 4 Tube Preparation
4
1
...
2
3
4
5
6
...
...
13