Printer Specification Sheet

ManualsBrandsEpson ManualsPrinter2250

ActionPrinter 2250

Printer Specifications

AC inlet

FONT lights

l-l

Light 1 Light 2

READY light

Font button

LF/FF

button

Control panel

output

guide

ribbon

cart-

Printing

Printmg

method:

Printing speed:

Ouality

Draft

NLQ

Printing direction:

Fciq:

PapPrfePd

spd:

BuJ/pr:,

Lkwnlmd merwry:

Y-pin impact dot matrix

Characters/inch

Characters/sewndiline

200

240

Bidirectional logic-seeking for text

ptitig.

(Lxdirectional can be

seleckd

with a

sofhvare

command.) Unidirectional for graphics.

l/hinch. l/dinch.

orprogrammablein

l/216-inch

increments

86.5

per

l/6-inch

line; 2.88

inches/second

with

continuous feed

4KB

Memory capacity for 6

NLQ

and 6 draft user-dcfincd

characters

cpi

condensed

160

Residmtjmh:

Character

tables:

North/South America:

Europe:

Other

countxies:

Chnractn sets:

Paper

singrr

slwts

mper

cassette):

Size

Thickness

Weight

Input

paper supply

Epson Draft

Epson NLQ Roman

Epson

NLQ

Sans Serif

One italic and 7 graphicscharacter tables

One

italic and 15 graphics character tables

One italic and 5 graphics character tables

13 international character sek

US model: Lcttrr (8.5

11 inches)

Other models: A4 (210

297 mm)

0.065 to 0.14 mm (OS026 to 0.0055 inches)

64 to

g/m2

(17 to 24 lb)

Use

g/m’

(24

lb)

paper under normal

COditiOIlS.

sheets

for 82 g/m’ (22 lb)

sheek for 64 g/m* (17 lb)

Total

khickncss

of paper stack should be less than

5 mm (0.2 inches).

Single shccb (Manual insrrtion):

Width

148 to 257 mm (5.8 to 10.1 inches)

Length

to 364 mm (3.6

14.3 inches)

Thickne?is

0.065 to 0.14 mm (0.0026 to 0.0055 inches)

Weight

53 to

g/m’ (14 to 24 lb)

Use

g/m*

(24 lb) paper under normal

conditions.

cable

clip

push

bactof

*The push tractor is an option (part number

CBOQ26’).

g-Pin

Printers

7/l

4192

AP-2250-1

Summary of content (12 pages)

PAGE 1
ActionPrinter 2250 Printer Specifications Printing Printmg method: Y-pin impact dot matrix Printing speed: Ouality Characters/sewndiline Characters/inch Draft NLQ 10 200 12 240 10 40 12 48 Printing direction: Bidirectional logic-seeking for text ptitig. (Lxdirectional can be seleckd with a sofhvare command.) Unidirectional for graphics. he Fciq: l/hinch. l/dinch. orprogrammablein l/216-inch increments PapPrfePd spd: 86.5 ms per l/6-inch line; 2.
PAGE 2
ActionPrinter 2250 Continuous paper: Width Copies Thickness Weight 101 to 254 mm (4 to 10 inches) Three sheets (one original plus two copies) 0.065 to 0.25 mm (0.0026 to 0.0098 inches) total 53 to 82 g/m2 (14 to 22 lb) for one sheet 40 to 58 g/m2 (12 to 15 lb) per sheet in multi-part forms l Use only two or three-part carbonless multi-part forms and use them with the push tractor. A Note: You can use recycled Paper under normal conditions.
PAGE 3
ActionPrinter 2250 - Interface specifications PC 850 (Multilingual) PC 860 (Portuguese) PC 863 (Canadian-French) PC 865 (Nordic) Your printer is equipped with an 8-bit parallel interface.
PAGE 4
ActionPrinter 2250 LF/FF button The Control Panel Press the LF/FF button during normal operation to feed paper line by line. Hold down the LF/FF button to load a single sheet of paper or to advance continuous paper to the next top-of-form. You can also press the LF/FF button to eject a page. You can control basic printer operations - line feeding, form feeding, paper loading and ejecting, and font selection - with the buttons on the control panel. The indicator lights show the printer status.
PAGE 5
ActionPrinter 2250 Running the Self Test Paper Handling You can run the self test with either continuous paper or single sheets; this section describes the easier way, with single sheets. Printing on single sheets 1. You can load standard-sized single sheets with the paper cassette and you can load single sheets of paper from 148 mm (5.8 inches) to 257 mm (10.1 inches) wide with the manual insertion slot. Make sure the printer is turned off. 2.
PAGE 6
ActionPrinter 2250 When you want to push the paper support back into the paper cassette, first remove paper from the cassette. Then hold down the locking tab while pushing the paper support in. l Using continuous paper with the push tractor You can use the push tractor to print on continuous paper from 101 mm (4 inches) to 254 mm (10 inches) wide. Note: The tractor is an option (part number C80026*). Installing the push tractor l l 1. Make sure the printer is turned off and is in the flat position.
PAGE 7
ActionPrinter 2250 3. Tips for using continuous paper . You can adjust the top-of-form position temporarily. Open the Replace the paper guide. printer cover and turn the gear marked by + and - signs to adjust the position, This adjustment is lost when you turn off the printer or feed the paper backward to the paper-park position.
PAGE 8
ActionPrinter 2250 2. Lower the paper-release lever to the single-sheet position. Envelopes You can use the manual insertion slot to print on individual envelopes. Always load envelopes manually through the rear slot. l Before loading an envelope, lower the flap on the printer’s rear slot. l Always feed envelopes by inserting the wide edge into the printer first, as shown. l 0! 3.
PAGE 9
ActionPrinter 2250 l - - - - The printer does not feed paper back to the paper-park position and then advance it to the top-of-form position between jobs even if paper is loaded when you turn on the printer. Note: Most software programs control the printer features listed here. If you can use your software program to control the printer, you may never need to use the default-setting mode. In fact, you may find that your program settings override your printer’s default settings.
PAGE 10
ActionPrinter 2250 Table A: Language selection .- Table C: Character table Light 1 Light 2 English OFF ON French OFF BLINK Language German ON OFF Italian ON ON Spanish ON BUNK - Once you press the LF/FF button, the printer prints the current default settings and the next instruction in the selected language After printing is finished, go to the next step. 5. If you want more help text to be printed, press the FONT button. After printing is finished, go to the next step.
PAGE 11
ActionPrinter 2250 9. Back feed Turn off the printer to exit the default-setting mode. Any changes you have made remain in effect until you change them again. When you set this feature to Disable, the printer never feeds paper backward. 10. After you exit the default-setting mode, slide the narrow cover back on the printer. The printer does not feed paper to the paper-park position even if you press the LF/FF and FONT buttons. The tear-off feature is disabled.
PAGE 12
ActionPrinter 2250 Installation/Support Tips AP-2250 Beep Codes 2 Long & 2 Short Indicates the printer has completed its power-on initialization process and is ready to print. 1 Short The Escape code for “BEL” has been received. 3 Short Paper out error.* 5 Long Operating error indication ** or a printer fatal error indication.*** * Paper out occurs in any of the following conditions: 1. Paper is not loaded after loading is attempted. 2.