User`s guide

5-20 Troubleshooting

R4C4590

Rev. C

A5 size TRBLE.FM

10/30/00 Pass 1

Proof Sign-off:

Takahashi, Kono _______

Takahashi _______

Hoadley _______

To print a hex dump, follow the steps below.

1. Make sure paper is loaded and the printer is turned off.

Caution:

Whenever you turn off the printer, wait at least five seconds

before turning it back on; otherwise you may damage the

printer.

2. To enter hex dump mode, hold down both the

LF/FF

and

Load/Eject

buttons while you turn on the printer.

3. Open a software program and send a print job to the printer.

Your printer prints all the codes it receives in hexadecimal

format.

If codes are printable, they appear in the right column as

ASCII characters. Nonprintable codes, such as control codes,

are represented by dots.

4. To turn off hex dump mode, press the

Pause

button to stop

printing. Then eject or tear off the printed page(s) and turn off

the printer.