User`s guide

A-12 Enhancing Your Printer With Options

R4C4590

Rev. C

A5 size OPTIONS.FM

10/30/00 Pass 1

Proof Sign-off:

Takahashi, Kono _______

Takahashi _______

Hoadley _______

2. Load a fanned stack of paper (up to 50 sheets), aligning the

right edge of the paper with the right paper guide. Be sure to

load the paper with the printable side up. Adjust the left paper

guide and center support to fit the paper, and then push back

the paper set levers to lock the paper in place.

3. Before printing, make sure single sheet feeding is selected.

Also adjust the thickness setting to the paper loaded in the

cut-sheet feeder. See “Selecting a Paper Source” on page 2-2

and “Adjusting the Paper Thickness Lever” on page 2-6 for

details.

4. In your printer driver software, select your paper size from

the Paper Size list, and select

Sheet Feeder Bin-2

from the

Paper Source list. (If you are printing from a DOS application,

select the bin number using the

Tear Off/Bin

button (LQ-680)

or the

Paper Source

button (LQ-680Pro) on the control

panel.)

The cut-sheet feeder loads paper when you send data to the

printer. You can also load paper by pressing the

Load/Eject

button.