Instruction Manual

Attaching the Paper Support
Insert the paper support into the central slot at the rear of the
printer as shown below.
Choosing a Place for the Printer
Follow the guidelines listed below when selecting a location for
your printer.
❑
Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
❑
Place the printer close enough to the computer for the
interface cable to reach it easily.
❑
Leave enough room on the table at the front of the printer
for the paper to flow freely out of it.
❑
Leave adequate room for easy operation and maintenance.
07
2
R
Hudson++ Ref. Guide
Rev.d
A5 size Chapter 2
05-6-98 DR, pass 5
Setting Up the Printer
2-3