Instruction Manual

Setting the adjust lever
When you print on thick paper such as envelopes or if ink
smears on your documents, set the adjust lever to the “+”
position. To change the setting, open the printer cover and
position the lever as shown below.
Lever Position Paper Type
0
Standard paper, coated paper, index cards,
transparencies, glossy paper/film
+
Envelopes
Note:
If the ink on your printout smears, set the adjust lever to the “+” position.
21
4
R
Hudson++ Ref. Guide
Rev.d
A5 size Chapter 4
04-16-98 DR, pass 1
Printing on Special Paper
4-3