Camcorder User Manual

Installing Software and Connecting
9-10
NOTE
◗
You may need your Windows 98 system disk for this
installation.
◗
Contact your system administrator if you see an error
message or you aren’t able to install the EPSON PhotoPC
3000Z drivers on your Windows 2000 system.
Follow these steps to install the driver for your camera:
1
Insert the PhotoPC 3000Z CD-ROM in your
computer’s CD-ROM or DVD drive.
2
At the first screen in the New Hardware Wizard, click
Next
.
3
Select
Search for the best driver for your device
(Windows 98) or
Search for a suitable driver for
your device
(Windows 2000). Then click
Next
.
4
Select
Specify a location
and browse to your
CD-ROM or DVD drive. (Click
Next
to browse in
Windows 2000.)
5
Select the
Win98E
folder. Click
OK
.
6
On the following screen, click
Next
. The wizard locates
your camera’s driver.
7
Click
Next
on the installation screen to install the driver.
When you see the following screen in Windows 2000,
click
Yes
to continue the installation:
8
When installation is complete, click
Finish
.
NOTE
When your camera is connected to the computer with USB, it can
automatically open applications using USB events. See page
10-14 for more information.
Capella.book Page 10 Thursday, April 20, 2000 4:21 PM